Full Product Manual
4. When bucking on a slope always stand on the uphill side of the log (Fig. 40).
When “cutting through”, to maintain complete control release the cutting
pressure near the end of the cut without relaxing your grip on the product
handles. Do not let the chain contact the ground. After completing the cut,
wait for the saw chain to stop before you move the product. Always stop the
engine before moving from tree to tree.
Fig. 40
5. Support small logs on a sawing stand or another log while bucking (Fig. 41).
Fig. 41
6. If the wood diameter is large enough for you to insert a soft bucking wedge
without touching the chain, you should use the wedge to hold the cut open to
prevent pinching (Fig. 42).
Fig. 42
13. After use
1-800-348-5004
DVTUPNFSTFSWJDF!GPDVTPOUPPMTDPN
45