Full Product Manual
1. Switch the product off, disconnect the spark plug connector and let it cool
down.
2. Check, clean and store the product as described below.
MAINTENANCE AND CARE
WARNING! Always switch the product off, disconnect the spark
plug connector and let the product cool down before performing
inspection, maintenance and cleaning work!
Maintain this product regularly and carefully! If the product is
improperly maintained, it may fail at its intended task, which may
produce fatal consequences.
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning
w
ill help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
operate it if you find broken and worn parts.
WARNING! Only perform repairs and maintenance work according
to these instructions! All further works must be performed by a
qualified specialist!
1. General cleaning
1. Clean the product with a dry cloth and mild soap. Use a brush for areas that
are hard to reach.
2. In particular clean the air vents (28) after every use with a cloth and brush.
3. Remove stubborn dirt with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
4. Check for any damage and wear. Repair damages in accordance with this
instruction manual or take it to an authorised service centre or a similarly
qualified
person be
fore using the product again.
2. Maintenance table
Inspect and maintain this product regularly based on below maintenance table.
1-800-348-5004
DVTUPNFSTFSWJDF!GPDVTPOUPPMTDPN
46