Full Product Manual
Fig. 51 Fig. 52
4. Check the spark plug (20) for damage and wear. The color of the electrode
should be light-brown colored.
5. Remove debris from the electrode with a soft wired brush; avoid heavy
cleaning of the electrode.
6. Dry the spark plug with a soft cloth, if it is wet from fuel.
7. Check the spark plug gap. It should be 0.6 - 0.7mm(Fig. 53).
Fig. 53
8. Replace with a new spark plug if either the electrode or the insulation is
damaged.
9. When replacing the spark plug, first
screw it in hand tight and then lightly
tighten it with the multi tool (32).
10. Refit the spark plug connector (19); ensure the rubber pad around the spark
plug connector is in correct position.
WARNING! Do not over tighten the spark plug to avoid any
damage!
0.6 - 0.7mm
19
20
32
1-800-348-5004
DVTUPNFSTFSWJDF!GPDVTPOUPPMTDPN
53