Full Product Manual

11. Place the filter (4c) back into the air filter case (4), re-attach the cover (4b)
and secure it with the fixation knob (4a) afterward.
8. Fuel tank
1. Empty the fuel tank when storing the product over 30 days to prevent the fuel
deteriorating.
2. Unscrew and remove the fuel tank cap (24) and empty the fuel into a suitable
container.
WARNING! Do not store the fuel in the fuel mixing container (31)!
9. Fuel filter
The fuel tank of this product is fitted with a filter, which is attached on the end of
the fuel pipe. Ask an authorised service centre or a similarly qualified person to
check and replace the filter at regular intervals if required.
10. Carburetor
The carburetor is pre-set by the manufacturer. Should it be necessary to make
any changes please contact an authorised service centre or a similarly qualified
person. Do not attempt to make any adjustments by yourself.
11. Muffler
If it be necessary to modify or replace the muffler, please contact an authorised
service centre or a similarly qualified person.
12. Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts
are available at an authorised dealer or through our customer service.
Description Model No. or Specification
Guide bar
200PXBW095 / 208PXBK095 / Blue Max 5651 / 21115
Saw chain 20LPX078X / 21PX078X / Blue Max 52208 / 21117
Spark plug
BM6A L8RTC/Torch L8RTF/NHSP
LD L8RTF/BOSCH L7T/TORCH
1-800-348-5004
customerservice@focus-ontools.com
54