Product Manual

ManualsBrandsBlue Max ManualsChainsaws(14") 38cc Gas Chain Saw

8805466 06/13

38CC CHAINSAW

CALIFORNIA PROPOSITION 65

WARNING: You can create dust

when you cut, sand, drill or grind

materials such as wood, paint,

metal, concrete, cement, or other

masonry. This dust often contains

chemicals known to cause cancer,

birth defects, or other

reproductive harm. Wear

protective gear.

WARNING: This product or its

power cord may contain

chemicals, including lead, known

to the State of California to cause

cancer and birth defects or other

reproductive harm. Wash hands

after handling.

Important!

When using equipment, a few safety

precautions must be observed to

avoid injuries and damage. Please

read the complete operating manual

with due care. Keep this manual in a

safe place, so that the information is

available at all times. If you give the

equipment to any other person, give

them these operating instructions as

well. We accept no liability for

damage or accidents which arise due

to non-observance of these

instructions and the safety

information herein.

SPECIFICATIONS

Engine Displacement: 38 cc

Bar Length*: 14in, 16in, or 18in

*Varies by Model

Maximum Idling Speed:

3400 RPM

Fuel Mixture: 40:1

Anti-Vibration Function

Chain Brake

Auto Chain Lubrication

CAUTION:

FOR YOUR OWN SAFETY READ

INSTRUCTION MANUAL

COMPLETELY AND CAREFULLY

BEFORE OPERATING THIS

CHAINSAW.

Any failures made in following the

safety regulations and and

instructions may result in an

electric shock, fire and/or serious

injury.

SAFETY INSTRUCTIONS

Only allow users who have read

and understand this manual

operate this chainsaw.

Wear protective gear, such as

steel-toed footwear, snugly fitting

clothing, heavy duty gloves, eye

protection (goggles or face

screen), hard hat and ear

protection (ear plugs or mufflers).

Do not wear jewelry and pull long

hair back.

Keep all body parts clear of the

chain while the engine is running.

Do not allow other people or

animals near the saw when it is

running, starting, or being

operated.

You must be mentally alert and in

good physical condition when

operating a chainsaw because the

work is strenuous

Carefully plan your sawing project

before starting. Do not begin until

you are sure the work area is

clean, you have secure footing

and if you are felling trees, that

you have a planned and clear

retreat path.

For Customer Service, please call 1-800-348-5004 or

email feedback@natitools.com

Model: 5466,

52721

Summary of content (23 pages)

PAGE 1
Model: 5466, 52721 38CC CHAINSAW CALIFORNIA PROPOSITION 65 SPECIFICATIONS SAFETY INSTRUCTIONS WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear. Engine Displacement: 38 cc Only allow users who have read and understand this manual operate this chainsaw.
PAGE 2
KICKBACK WARNING: Kickback is the backward, upward or sudden movement of the guide bar that occurs when the guide bar contacts an object or when the wood closes in and pinches the saw in the cut. The saw contacting a foreign object in the wood can also result in a loss of control. Rotational kickback occurs when the moving chain contacts an object with the upper tip of the guide bar. This can cause the chain to dig into the object, which then stops the chain for a moment.
PAGE 3
FUEL AND CHAIN OIL FUEL WARNING: Gasoline is very flammable. Avoid smoking or any flame or sparks near the fuel. Make sure to stop the engine and allow it to cool before refueling the unit.
PAGE 4
2. Set the switch to the “I” position. NOTE: When starting immediately after stopping the engine, set the choke knob in the first-stage position (choke open and throttle lever in the starting position). NOTE: Once the choke knob has been pulled out, it will not return to the operating position even if you press down on it with your finger. When you wish to return the choke knob to the operating position, pull out the throttle lever instead. 3. Pull throttle trigger and push throttle lock button.
PAGE 5
HOW TO CONFIRM: 1. Turn off the engine. 2. Holding the chainsaw horizontally, release your hand from the front handle. Hit the tip of the guide bar to a stump or a piece of wood, and confirm brake operation. Operating level varies by bar size. This product has accordingly been designed with a ventilation hatch on the right side of the surface of the cylinder cover to allow warm air to be supplied to the engine and to thereby prevent icing from occurring.
PAGE 6
• It is not necessary to force the saw into the cut. Apply only light pressure while running the engine at full throttle. • When the saw chain is caught in the cut, do not attempt to pull it out by force, but use a wedge or a lever to open the way. GUARD AGAINST KICKBACK OILING PORT • This saw is equipped with a chain brake that will stop the chain in the event of kickback if operating properly.
PAGE 7
CAUTION 3. GUIDE BAR • Do not use an unstable foothold or ladder. When the guide bar is dismounted, a. Using a wire hook, take out the remove sawdust in the bar groove and filter from the filler port. the oiling port. • Do not overreach. • Do not cut above shoulder height. 2. FUEL FILTER Grease the nose sprocket from the feeding port on the tip of the bar. • Always use both your hands to hold the saw.
PAGE 8
5. SPROCKET Check for cracks and for excessive wear interfering with the chain drive. If the wear is considerable, replace it with a new one. Never fit a new chain on a worn sprocket, or a worn chain on a new sprocket. MAINTENANCE OF SAW CHAIN AND GUIDE BAR Place the file on the cutter and push straight forward. Keep the file position as illustrated. After each cutter has been filed, check the depth gauge and file it to the proper level as illustrated.
PAGE 9
feedback@natitools.
PAGE 10
North American Tool Industries (NATI) makes every effort to ensure that this product meets high quality and durability standards. NATI warrants to the original retail consumer a 1-year limited warranty from the date the product was purchased at retail and each product is free from defects in materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, or accidents, repairs or alterations, or a lack of maintenance.
PAGE 11
38CC CHAINSAW Model: 5466, 52721 Handle & Tank Assembly # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15-1 15-2 15-3 16 16-1 16-2 16-3 Description front handle assembly front handle assembly torsion rod spring screw ST4.8x16 torsion rod spring cap screw ST4.8x16 fuel tule return tube 2 fuel tule base weight block fuel filter base spring washer GB/T 97.
PAGE 12
38CC CHAINSAW Model: 5466, 52721 Brake Assembly # 1 2 3 4 5 6 7 8 9 10 11 12 Description Qty. brake belt right cover nut M8 heavy block tube heavy block heavy block torsion spring secondary pull-rod main pull-rod pin 3x9 pin 3x14 screw M5x40 front guard tube 1 1 2 1 1 1 1 1 2 1 1 For Customer Service, please call 1-800-348-5004 or email feedback@natitools.com # 13 14 15 16 17 18 19 20 21 22 23 Description Qty. front guard brake torsion spring big washer GB/T 96.1 5X 23X1.
PAGE 13
38CC CHAINSAW Model: 5466, 52721 Starter Assembly # 1 2 3 3-1 3-2 3-3 Description Qty. brake belt right cover nut M8 heavy block tube heavy block heavy block torsion spring 1 1 2 1 1 1 For Customer Service, please call 1-800-348-5004 or email feedback@natitools.com # 3-4 3-5 3-6 3-7 3-8 4 13 Description Qty.
PAGE 14
38CC CHAINSAW Model: 5466, 52721 Clutch & Oil Pump Assembly # 1 2 3 4 5 6 6-1 6-2 6-3 Description worm nylon washar worm needle bearing 10*13*13 clutch shell clutch washer clutch assembly retainer shoe block clutch extension spring For Customer Service, please call 1-800-348-5004 or email feedback@natitools.com Qty. 1 1 1 1 1 1 1 3 # Description 7 8 9 10 11 12 13 oil tube oil nozzle oil pump screw M4x14 oil pump cover plate screw M4x14 ground lead circlip 14 Qty.
PAGE 15
38CC CHAINSAW Model: 5466, 52721 Flywheel & Ignitor Assembly # 1 1-1 1-2 1-3 1-4 2 Description flywheel assembly flywheel torsional spring pawl pawl screw spring washer GB/T 93 8 For Customer Service, please call 1-800-348-5004 or email feedback@natitools.com # 3 4 5 6 7 8 Qty. 1 1 2 2 2 1 15 Description nut M8 screw M4x20 spring washer GB/T 93 4 washer GB/T 97.1 4 ignitor flameout wire 8805466 Qty.
PAGE 16
38CC CHAINSAW Model: 5466, 52721 Upper Cover & Air Filter Cover # 1 2 3 4 5 6 7 Description screw ST 4.8x16 choke plug guide sleeve damping block igniter sheathing upper cover plate dust shield For Customer Service, please call 1-800-348-5004 or email feedback@natitools.com # 8 9 10 11 12 13 Qty. 4 1 1 1 1 1 1 14 16 Description throttle lever retainer throttle rod air fillter gasket air fillter air fillter cover lock nut washer air fillter lock nut 8805466 Qty.
PAGE 17
38CC CHAINSAW Model: 5466, 52721 Cylinder & Carburetor Assembly # 1 2 3 4 5 6 7 8 9 Description nut M5 silencer cover plate spark catcher silencer assembly silencer gasket nut 5x60 cylinder nut 5x20 spark plug For Customer Service, please call 1-800-348-5004 or email feedback@natitools.com # 10 11 12 13 14 15 16 17 Qty. 2 1 1 1 1 2 1 4 1 18 17 Description air intake tube gasket air intake tube carburetor gasket carburetor screw ST4.
PAGE 18
38CC CHAINSAW Model: 5466, 52721 Piston & Crankshaft Assembly # 1 2 3 4 Description crankshaft components woodruff key 2.9X10 needle bearing ring piston pin circlip For Customer Service, please call 1-800-348-5004 or email feedback@natitools.com # 5 6 7 8 Qty. 1 1 2 2 18 Description piston piston ring piston pin needle bearing NA10x14x11 8805466 Qty.
PAGE 19
38CC CHAINSAW Model: 5466, 52721 Engine Assembly # 1 2 3 4 5 6 7 8 9 10 11 12 Description oil seal 12x22x7 left crankshaftcase case bearing 6201 D crankshaft case gasket pin 3x9 screw M5x10 screw M5x16 spiked bumper chain guide chain guide screw tightener tightener screw M5*48 For Customer Service, please call 1-800-348-5004 or email feedback@natitools.com # 15 16 17 18 19 20 21 22 23 24 25 26 Qty. 1 1 2 1 3 1 1 1 1 1 1 1 19 Description protecting shield screw M4x10 oil seal 12x32x5 ring GB/T 893.
PAGE 20
I. EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The United States Environmental Protection Agency (EPA), together with North American Tool Industries are pleased to explain the Emission Control System Warranty on your new small off-road engine. New small off-road engines must be designed, built, and equipped to meet stringent anti-smog standards for the state of the federal government.
PAGE 21
Only a NATI Authorized Warranty Service Facility can perform warranty service. When requesting warranty service, evidence must be presented showing the date of the sale to the original purchaser/owner. The purchaser/owner shall be responsible for any expenses or other charges incurred for service calls and/or transportation of the product to/from the inspection or repair facilities.
PAGE 22
3. Any warranted, emissions-related part that is scheduled for replacement as required maintenance in the Owner’s Manual shall be warranted for the period of time prior to the first scheduled replacement point for that part. If the part fails prior to the first scheduled replacement, the part shall be repaired or replaced by NATI according to subsection 4 below.
PAGE 23
EMISSIONS-RELATED PARTS INCLUDE THE FOLLOWING: For engine families CZHWS.0404SP 1. Fuel Metering System: a. Gasoline carburetor assembly and its internal components (if so equipped). b. Fuel Filter (if so equipped). c. Carburetor Gaskets d. Fuel Pump (if so equipped). e. Fuel Hose f. Clamps 2. Air Induction System including: a. Intake Pipe/Manifold b. Air Cleaner 3. Ignition System including: a. Spark Plug b. Ignition Module/Coil 4. Catalytic Muffler Assembly (if so equipped) a. Muffler Gasket b.