BAHAMAS SIDE TABLE ASSEMBLY instructions
Before You Begin: You already know this, but it’s best to read ALL the instructions before assembly. Failure to do so may result in faulty assembly and potential injury ( no one wants that kind of stain on their party hosting record). Assemble your Blue Oak™ outdoor furniture on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items (there’s no “i” in “team”).
PARTS NO. DESCRIPTION QTY A Table Top 1 B Table Leg 4 C Support Bar 1 HARDWARE NO.
Assembly Instructions Take a deep breath. We promise it’s pretty simple. Note: There are two types of hex bolts. Make sure you’re using the type specified in each step. Do not fully tighten the bolts until you’ve completed the assembly and checked to see if the alignment is correct. Step 1 Place the legs (B) and support bar (C) on a soft, non-abrasive surface such as cardboard or a blanket. Step 2 See Figure 1.
BB DD CC A Figure 2 Step 4 Fully tighten all bolts and apply the bolt head caps (DD) on to each bolt. Eureka! Your side table is ready to hold mimosas, cups of tea, pastries or whatever floats your boat.
blueoakoutdoor.
