Service manual

-21-
Revision 1/F3503
Two
Screws
Three screws
Two screws
Figure 6.3.22
9) Remove two screws securing insulation
panel to oven liner.
Two screws
Insulation
panel
Figure 6.3.24
7) Remove wrapper.
8) Undo two screws securing left hand
counter bracket to oven and remove.
Replace, ensuring that bracket is installed
with roller to top.
Figure 6.3.21
Figure 6.3.23
10) Prise open the insulation panel to allow
access to the right hand counter bracket.
Undo two screws securing bracket, and
remove bracket.
11) Replace, ensuring roller to top of bracket.
Re-assemble in reverse order.
6) Remove three screws securing lintel
support to oven and remove.