Specifications

3
Specifications
Model Numbers Covered in this Specification
GE570 Gas Target Top Range / Electric Static Oven - 900mm.
GE576 Gas Target Top Range / Electric Convection Oven - 900mm.
General
A commercial heavy duty, gas fired Target Top having a high output, two stage double-ring iron cast
burner offering accurate temperature control and infinitely variable heat with the heat radiating out
from the centre of the Target Top. The Main Burner is located underneath removable cast target top
plates.
With a heavy duty, high efficiency electric static or convection oven options, fitted with a 900mm,
6.5kW electric static oven and a 6.6kW Convection Oven created for compact modular kitchens.
Both ovens are fitted with 4.5kW bottom element and 2.0kW top element. The Convection oven is
fitted with a 100W oven fan motor.
Gas Supply Requirements
NOTE:
• (*) The burner operating pressure is to be measured at the manifold test point with the
main burner operating at the 'High Flame' setting.
• NAT, LPG & Butane Only - The operating pressure is ex-factory set and is not to be
adjusted, apart from when converting between gasses, if required.
• TOWN GAS Only - The burner operating pressure is to be adjusted using the adjustable
gas regulator supplied.
• (**) Town Gas Option is only available with specific ex-factory built Town Gas models,
which can also be converted to any other gas. Standard models can only be converted
between Nat. Gas, LP Gas and Butane, but not Town Gas.
• Refer to the ‘Gas Conversion and Specifications' section of this manual for further
details.
Natural Gas LP Gas / Butane
Input Rating 45MJ/hr 45MJ/hr
(N.H.G.C.) (42,650BTU) 42,650BTU)
Supply Pressure
1.13 - 3.40kPa 2.75 - 4.50 kPa
(4.5” - 13.5” w.c.) (11” - 18” w.c.)
Operating Pressure
1.0kPa (*) 2.6kPa (*)
(4.0” w.c.) (10.0” w.c.)
Gas Connection ¾” BSP Male
Town Gas (**)
45MJ/hr
42,650BTU)
0.75 - 1.50kPa
(3” - 6” w.c.)
0.63kPa (*)
(2.5” w.c.)