Manual

ENGLISH
5
2: Pair the SENSE with your Phone
1. Slide the power switch to the ON position.
2. The SENSE will announce the available languages. Tap
the
BlueAnt
symbol when you hear your language.
3. The SENSE will now talk you through the pairing
process.
4. The pairing code is 0000 (four zeros). Note: your BlueAnt
SENSE will appear in the Bluetooth menu on your phone as the “BlueAnt S3”.
If you select the wrong language: turn off your SENSE without completing the pairing.
When you switch it back on your SENSE will ask you to select the language again. If this
does not work, reset your SENSE and start again (see “Reset the SENSE” on page 17).
If the SENSE does not go into pairing mode: hold down the
BlueAnt
symbol for about 6
seconds.
Slide the switch to power on
then follow the prompts