User Guide Solar Panel User Guide User Guide Technical details What is in the box PV220 User Guide Buckle up Fix Model: PV220 Solar Panel MC4 Cable User Manual & Warranty Card Press to fix ❹ Connect to power station MC4 Connectors How to use Maximum Power(Pm) 220W* Open circuit voltage 21.6V Short circuit current 13.5A Cell efficiency Up to 23.
AC200MAX Portable Power Station Please read this manual before use and follow its guidance. Keep this manual for future reference.
User Manual Please read this manual before use and follow its guidance. Keep this manual for future reference.
Contents 01. BRIEF INTRODUCTION ...................... ..... 01 02. ABBREVIATION ...................................... 01 03. SAFETY INSTRUCTION............................. 01 04. BLUETTI APP ......................................... 02 05. IN THE BOX ........................................... 03 06. FEATURES ............................................ 07 07. LET`S GET STARTED .............................. 08 08. TOUCHSCREEN ...................................... 08 09. TOUCHSCREEN OPERATION ..........
Just Power On 1.BRIEF INTRODUCTION For I/O capability, the AC200MAX features higher continuous output power at 2,200W from its pure sine wave inverter, a 100W PD3.0 USB-C port, an upgraded MPPT controller which now handles up to 900W of solar input and a built-in 30A NEMA TT-30 outlet designed especially for the RV crowds.
BLUETTI the equipment by anyone other than authorized personnel. ● DO NOT operate in wet conditions. If the equipment becomes wet, please let the unit dry completely before using. ● Please ensure proper ventilation while in use and do not obstruct fan openings. Inadequate ventilation may cause permanent damage to the equipment. ● DO NOT move the unit while operating as vibrations and sudden impacts may lead to poor connections to the hardware inside.
Just Power On connected with the App successfully. Press the ‘’gear icon’’ to customize the current working mode and parameters of your AC200MAX under “Settings”. NOTE: Please keep your phone within 5m/16.4ft of the AC200MAX in order to reduce connectivity issues during update. 5.IN THE BOX Standard Accessories No.
BLUETTI 3 1 PV Charging Cable (XT90 - MC4) For solar charging, up to 15A,900W. AC200MAX Portable Power Station 4 Car Charging Cable 1 (XT90 - Cigarette Lighter Port) Charge AC200MAX by car. AC200MAX Portable Power Station 5 Multi-functional Aviation Cable (XT90 - 1 Aviation) Expand the charging methods via PV input port. Station 6 AC200MAX Portable Power Station User Manual 1 Please read the manual before use and follow its guidance, keep this manual for future reference.
Just Power On 1 8 AC200MAX Portable Power Station Certificate of QC PASS Optional Accessories No. 9 Category Lead-acid Battery Charging Clamp Charging AC200MAX through lead-acid battery only. DO NOT charge the lead-acid battery via this cable. 10 Type Optional Input Cable Multi-functional Input Cable (XT90 - DC7909) Expand the charging methods via AC input port. Optional 11 12V/30A Output Bundle (Aviation - XT60, XT60 - SPC45) Output Accessories Perfect for RV.
BLUETTI 13 Optional B230 Battery Module Accessories B300 Battery Module Accessories Extra 2048Wh capacity, up to * 2 B230 can be connected to AC200MAX. 14 Optional Extra 3072Wh capacity, up to * 2 B300 can be connected to AC200MAX.
Just Power On 6.FEATURES 01 09 02 10 03 11 12 04 13 05 14 06 07 08 Power Button Wireless charging 15W x 2pcs Lone/Short press to turn ON/OFF the AC200MAX. Place your phone(if wireless charging supported) on the top of the AC200Max vertically, and turn on the DC in mainpage on screen. DC 12V/30A output Special 30A output port can be adapted to appliances widely,perfect for RV. Touchable interaction LCD display Can be pressed/tapped to control the unit by nails.
BLUETTI 7.LET`S GET STARTED (1) Startup: short press the power button to turn it on, the indicator light is on. (2) Shutdown: press and hold the power button for more than 1 seconds, and the indicator light will be off.
Just Power On (4) Support users to view fault information, BMS, DSP, ARM, HMI hardware version. 9.TOUCHSCREEN OPERATION Warm tip: ● The touchable LCD screen is a resistance screen. we recommend tapping the touch the touchscreen by fingernail lightly until it "beeps". ● To maximize the lifespan of the LCD screen, please avoid direct sunlight on it. (1) When press the power button,the mainpage will display as (Homepage). 2021-07-20 10 : 20 : 21 Others (Figure 1) (Homepage) (220-240V Version) a.
BLUETTI (2) Tap the settings icon in the main interface (Homepage) to enter the setting interface as (Figure 1) : Warm tip: Please enter the setting interface to set the date and time according to the local time zone, and check the output voltage, frequency and other parameters for the first time startup. Voltage and Frequency Reference: JP: 100V/50Hz US: 120V/60Hz EU: 230V/50Hz UK: 230V/50Hz DC Input Source: Select the right method you choose to charge AC200MAX.
Just Power On accessed directly from the shortcut icon in the Homepage; ● Tap the “Fault History” icon, all the fault information generated by the AC200MAX in daily use. (Figure 4) (4) Tap Alarm Icon (Homepage) to view the current error information: the fault indicator will display orange if there is a fault occurs. 10.CHARGING (1) From AC wall outlet ● Turn AC200MAX ON and connect the plug of adapter to the wall outlet, the other side to AC input port.
BLUETTI ● Plug and play charging: AC200MAX will be activated when solar charging system built up successfully. ● Max input current of the solar charging: 15.2A ± 0.3. 3 5 (3) Car Charging ● Press the power button and connect it to the cigarette lighter port through the car charging cable. ● Enter the setting interface as shown in (Figure1) through the display screen to set DC input source to car mode; The product can be charged with 8.2A maximum current.
Just Power On (5) Lead-acid Battery Charging ● Connect to the positive and negative poles of the battery through the Charging Clamp (Accessories 9) Note: pay attention to distinguish the positive and negative poles of the battery, the red side indicates positive pole. ● Enter the setting interface in (Figure 1) through the screen to set DC input source to “car mode” to achieve 12V/24V car charging mode, with the maximum current of 8.2A. Note: DO NOT charge the battery through this accessory.
BLUETTI Adapter Solar Panels Car Lead-acid Battery (AC200MAX Dual Charging System) 11.DISCHARGING (1) Turn on 12V/30A, 12V/10A, cigarette lighter port, USB and USB-C output: press the power button, then enter the main interface through the touch screen, tap the DC ON/OFF button and confirm. (2) Turn off DC Output, tap the DC ON/OFF button and confirm. (3) Turn on AC Output: press the power button, then enter the homepage through the touchscreen, tap the AC ON/OFF button and confirm.
Just Power On (2) Indoor Refrigerator, kitchen devices such as kettle, toaster, blender, coffee maker, rice cooker, laptops, phones, lighting, etc. 13.EXAMPLES OF LOADS (1) 12V/30A, 12V/10A, cigarette lighter port, USB-A and USB-C output port are suitable for most products in the market, but some products may trigger overcurrent protection if there is a large current impact at the moment of starting. (2) The power of electrical products used for AC output should be less than 2200W.
BLUETTI AC200MAX #1 Extended Battery Pack #2 Extended Battery Pack ● Battery Expansion Instruction Hotswap Expansion Battery Module B230/B300 designed to achieve capacity backup with easy plug-on P090A Battery Expansion Cabel. a:Button 01 b:Button 02 a: Press to turn ON/OFF the Expansion Battery Function. b: Switch to LOCK/UNLOCK the cable with AC200MAX. c: Turn On B230 or B300 battery module.
Just Power On AC200MAX AC200MAX B230 B230 Barb down ① Barb down ① Lock Lock Finish ② ② Second Step First Step B230 AC200MAX AC200MAX Barb down ① Lock B230 B230 ② Second Step B230 Finish Barb down ① Lock ② Barb down First Step ① Lock ② Second Step AC200MAX Capacity Extended Mode 17
BLUETTI 15.ESTIMATION OF OPERATING TIME Smartphone LED Light Bulb Television 175-200Times 10W Around 75-85hrs 20W Around 20-22hrs 75W Electronic Tools Refrigerator Slow Cooker Around 19-20hrs 80W Around 17-19hrs 90W Around 8-9hrs 200W 2048Wh × DOD × η ÷ (load W) = charging time(unit:h) Note:DOD is the battery discharge depth,η is the local inverter efficiency, DOD=90%, η =88%。 16.TECHNICAL SPECIFICATIONS Model No. AC200MAX Net Weight 28.1kg (61.9lbs) Dimensions 420*280*386.5mm (16.5*11.
Just Power On 100V 2000W Power of 110V 2200W Output 120V 2200W US 2200W UK,EU 220-240V 100V 110V Over-load 120V 220-240V Surge Frequency Inverter Efficiency Short-circuit Protection Over-temperature Protection JP 2000W
BLUETTI RV *1 Voltage 12V Current 30A Over-load Power Shortcircuit Note: / 400W 2s, Turn off output function Yes Turn Off all DC output ports. Protection a: 30A Max. current for all DC output port b: The cigarette lighter port will be shut off once overload. c: 12V/30A port will be shut off when overload again. USB-A *2 Voltage 5V Current 3.0A 3A for both Yes Recover automatically Voltage 5-12VDC Support QC3.
Just Power On T500 Adapter charging (On PV input port) Car Charging 500W / 8A / 11.5-14.5V Set DC input source on screen: Others 23-29V 12V Lead-acid Battery: 11.5V ± 0.2V;24V Lead- 8A acid Battery: 23V ± 0.2V Note:PV Input, Car Charging and additional T500 shares the same Aviation Port. T500 AC Adapter Input Voltage 100-240VAC / Voltage Range 58.8V / Max.
BLUETTI 011 012 014 015 016 017 018 019 020 021 022 023 025 026 027 028 029 030 031 032 033 034 035 036 041 042 043 044 045 046 051 053 054 055 12V/10A Over Current 12V/30A Over Current DC Start Failure DC Output Relay Error Bus Start Failure Inverter Start Failure Bus Low Voltage Bus High Voltage Inverter Low Voltage Inverter High Voltage Inverter Low Frequency Inverter High Frequency Battery High Voltage Battery Low Voltage Battery Unconnected Fan Error NTC Error Calibration Error Inverter Over Load Inve
Just Power On 18. FAQ (Frequently Asked Questions) ● How to claim the warranty? Please place your after-sale requirement as the warranty card written to the vendor where you order the product. ● Can the unit be upgraded? When AC200MAX connected with BLUETTI App via bluetooth, the firmware including ARM, DSP, IoT and BMS can be upgraded online through OTA. ● Can it be charged and discharged at the same time? Yes.
BLUETTI 20. FCC WARNING This device complies with Part 15 of the FCC Rules. Operation on the product is subject to the following conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Company: POWEROAK GmbH Address: Lindwurmstr. 114, 80337 München Germany Mail: logi@bluetti.de Company: POWEROAK ENERGY UK CO.,LTD Address: Suite 108 Chase Business Center 39-41 Chase Side London United Kingdom N14 5BP Mail:poweroak.eu@bluetti.com P/N:17.0303.
B230 Portable Power Station Please read this manual before use and follow its guidance. Keep this manual for future reference.
Just Power On 01
BLUETTI 02
Just Power On 5.IN THE BOX Standard Accessories No. Category Quantity 1 1 B230 Extension Battery B230 Portable Power Station 2 Capacity Fusion Cable(P090A) 1 For battery expansion, connect B230 with AC200MAX. B230 Portable Power Station B230 Portable Power Station 3 User Manual 1 Please read the manual before use and follow its guidance, keep this manual for future reference. 4 1 B230 Portable Power Station Warranty Card Please keep this Warranty Card properly.
BLUETTI Additional Purchase Accessories Sold on BLUETTIPOWER.COM No. Category T500 Adapter B230 Portable Power Station Optional Input Cable D050S Charging Kit(Including D050S unit, PV Charging Cable, Car Charging Cable) D050S Lead-acid Charging Cable 6.LET`S GET STARTED ● Turn on the main power switch located on the back of B230. ● Power On: Short press of the power button. The power button indicator will illuminate. ● Power Off: Long press of the power button for 2 seconds.
Just Power On 1 2 3 4 5 6 7 8 05
BLUETTI 06
Just Power On 07
BLUETTI a: Button 01 b: Button 02 08
Just Power On 10.TECHNICAL SPECIFICATIONS General Specs Model No. B230 Net Weight 21.8kg (48.0lbs) Dimensions 420*280*227.5mm (16.5*11.0*8.91in) Charge Temperature 0-40℃ (32-104 ℉ ) Discharge Temperature -20-40℃ (-4-104 ℉ ) Storage Temperature -20-40℃ (-4-104 ℉ ) Working Environment 10-90% Humidity Capacity 2048Wh (40Ah) Battery Type LiFePO4 Standard Battery Voltage 51.2VDC DC Output Cigarette Lighter Port * 1 12VDC/10A USB-A * 1 3.
BLUETTI 10
Company: POWEROAK GmbH Address: Lindwurmstr. 114, 80337 München Germany Mail: logi@bluetti.de Company: POWEROAK ENERGY UK CO.,LTD Address: Suite 108 Chase Business Center 39-41 Chase Side London United Kingdom N14 5BP Mail:poweroak.eu@bluetti.com P/N:17.0303.