Use and Care Manual

BLUETTI

(2) Tap the settings icon in the main interface (Homepage) to enter the setting

interface as (Figure 1) :

Warm tip: Please enter the setting interface to set the date and time according

to the local time zone, and check the output voltage, frequency and other

parameters for the first time startup.

Voltage and Frequency Reference:

JP: 100V/50Hz

US: 120V/60Hz

EU: 230V/50Hz

UK: 230V/50Hz

DC Input Source: Select the right method you choose to charge AC200MAX.

ECO Mode: While it`s on, the AC output ports will be automatically turned off if

the load on it is less than 50W over 4 hours.

Press “Next” icon to enter date setting as (Figure 3):

Backlight and Sleep time: set the proper value as your need for power saving.

Date and time: 2000-00-00、00：00：00, tap the number to set it right.

（Figure 2）（Figure 3）

(3)Return to the mainpage, tap the “Data” icon to enter the Data page (Figure 4) :

● Tap the “Product Info” icon, you can view the product model, software version,

BMS version etc;

● Tap the “Inverter & Charger Info” icon, you can view input and output

information, which can also be accessed directly from the shortcut icon on

the Homepage;

● Tap the “BMS Maintenance” icon to view the status of battery, and it can also be