Use and Care Manual
13
Just Power On
(5) Lead-acid Battery Charging
● Connect to the positive and negative poles of the battery through the
Charging Clamp (Accessories 9)
Note: pay attention to distinguish the positive and negative poles of the battery,
the red side indicates positive pole.
● Enter the setting interface in (Figure 1) through the screen to set DC
input source to “car mode” to achieve 12V/24V car charging mode, with the
maximum current of 8.2A.
Note: DO NOT charge the battery through this accessory.
5
9
(6) Dual Charging
● Set the DC input source to PV to achieve AC + PV Dual Charging
● Set the DC input source to others to achieve AC + T500/Lead-Acid Battery
Charging.
Others
(220-240V Version)(100-120V Version)