Product Brochure

1. MAINS CABLE
The BatteryPlus35-II is pre-cabled with a
permanent mains power supply cord for use
with 240V or 110V input power.
2. LOAD TERMINAL BLOCK – COMMON
NEGATIVE CONNECTION
Negative wire connection return point for the
caravan’s 12V loads.
3. LOAD OUTPUTS – 15A X 2 POSITIVE
CONNECTIONS
Used for connecting the positive wire of the
12 V loads, outputs 1 & 2
4. LOAD OUTPUTS – 10A X 12 POSITVE
CONNECTIONS
Used for connecting the positive wire of the
12 V loads, outputs 3 – 14
5. AUX+
Connection point for external DC input
positive.
6. BATT+
Connection point for battery positive and
negative terminal.Attach fuse to Batt+ wiring
7. BATT-
8. NOT USED
9. RESET (MASTER RESET BUTTON)
Press the Master Reset Button if any part of
the system is unresponsive or not operating
correctly during or after installation
10. CAN BUS COMMUNITCATION CONNECTOR
To connect to and power BMPRO accessories
(BC300 + CommLink External Shunt or
OdysseyLink) or monitors (RVView or Trek).
11. REMOTE SWITCH TERMINAL BLOCK (RSW)
Terminal block for connecting an optional
remote switch. This switch is used to
disconnect the loads from all power
12. MOUNTING HOLE (X4)
13. LOAD OUTPUT STATUS INDICATORS
14. SOLAR PANEL CONNECTION
This connection is for the solar panel input
15. +BRK BATTERY OUTPUT (40A RATED)
This output is an uncontrolled 15th output
with a maximum current rating of 40 A. This
is specifically designed for loads which do
not need to be isolated or have a current
rating of higher than the inbuilt circuit
protection of the individual outputs and have
a current rating less than 40 A. This may
include but not limited to:
• BMPRO SwayControl
• BMPRO Trailsafe (+)
• Heaters
• Stereo memory
16. SYSTEM STATUS INDICATOR
Indicates the operational status of the
BatteryPlus35-II
TEAM
BMPRO
.COM
BMPRO
[phone] | [e-mail]
19 Henderson Rd, Knoxfield VIC 3180 Australia
teambmpro.com
1
2
3
4
5
6
7
15
13
14
16
12
8
9
10
11