OWNER’S MANUAL MiniBoost TEAMBMPRO.
POWERING YOUR ADVENTURES Born by the innovative spirit of our parent company Setec, with over 50 years’ experience in power solutions, and design and manufacturing facilities in Melbourne, we are the leading experts in RV power management. Inspired by the great Australian outdoors, we have created a range of rugged, smart and reliable products to power your adventures.
SAFETY PRECAUTIONS Please read the Safety Precautions before installing or using the MiniBoost. Be sure to observe all precautions without fail. Failure to observe these instructions properly may result in property damage, or personal injury which depending on the circumstances may be serious and cause loss of life. Correct installation is the most critical factor in ensuring the safe use of the MiniBoost If every consideration of these instructions has been satisfied, the MiniBoost will be safe to operate.
CONTENTS SAFETY PRECAUTIONS .........................3 ABOUT THE MINIBOOST .........................5 WHAT’S INCLUDED .........................5 INSTALLATION INSTRUCTIONS .........................6 PERSONNEL .........................6 VENTILATION, ORIENTATION AND THERMAL CONSIDERATIONS .........................6 REQUIRED FOR INSTALLATION .........................6 MOUNTING .........................6 WIRING .........................7 WIRE SIZE ...................
ABOUT THE MINIBOOST The MiniBoost is intended for the RV market to enable the effective charging of the Caravan/Camper house battery from the towing vehicle’s electrical system even if the voltage delivered from the towing vehicle is lower than that normally required to charge the house battery. The MiniBoost has been specially designed to work with the BMPRO BatteryPlus35 and J35. The input fuse is illuminated from behind with a green light when the input voltage is sufficient for the unit to operate.
INSTALLATION INSTRUCTIONS PERSONNEL Installation is to be carried out only by suitably qualified personnel VENTILATION, ORIENTATION AND THERMAL CONSIDERATIONS The MiniBoost may be installed in any orientation, but located such that there is free air movement around the product. This allows for the lowest operating temperature of the internal electronics and highest reliability of the product. The MiniBoost should be located in the Caravan preferably close to the House Battery.
WIRING It is recommended that the MiniBoost connect to the vehicle through a 30A (minimum) Isolating Relay and 30A (minimum) fuse. The relay function is to prevent the vehicle battery from discharging when the vehicle is not in use. WIRE SIZE Cables should be sized to carry 30A. The minimum recommended wire size is 5mm2. Wiring resistance, inclusive of connectors should be less than 100mR total (vehicle battery to MiniBoost input wires).
WIRING THE MINIBOOST TO THE BATTERYPLUS35 Tow Vehicle 30Amp Fuse Relay 30A To AX Input In Caravan Ignition House Battery Figure 2: Wired to BatteryPlus35 8
WIRING THE MINIBOOST TO THE J35 Tow Vehicle 30Amp Fuse Relay 30A To AX Input In Caravan Ignition House Battery Figure 3: Wired to J35 9
SERVICING Do not attempt to service the MiniBoost, OR dismantle, modify or repair the MiniBoost yourself; this will void your warranty. If your MiniBoost requires servicing, please consult your BMPRO dealer or visit teambmpro.com for assistance. FAQS AND TROUBLESHOOTING Need help troubleshooting your MiniBoost? Contact our customer service team online at teambmpro.com/technical-support/ or give us a call on (03) 9763 0962..
WARRANTY TERMS AND CONDITIONS Registering your BMPRO product is an important step to ensure that you receive all the benefits you are entitled to. Please visit teambmpro.com to complete the online registration form for your new product today. 1. BMPRO goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any reasonably foreseeable loss or damage.
POWERING YOUR ADVENTURES. TEAM BMPRO .COM BMPRO +61 3 9763 0962 | sales@teambmpro.com 19 Henderson Rd, Knoxfield VIC 3180 Australia teambmpro.
