Product Manual

6
INSTALLATION INSTRUCTIONS
PERSONNEL
Installation is to be carried out only by suitably qualified personnel
VENTILATION, ORIENTATION AND THERMAL CONSIDERATIONS
The MiniBoost may be installed in any orientation, but located such that there is free air
movement around the product. This allows for the lowest operating temperature of the
internal electronics and highest reliability of the product.
The MiniBoost should be located in the Caravan preferably close to the House Battery.
The compartment into which the MiniBoost is installed must be well ventilated to
provide adequate ventilation to the outside world (or larger internal cavity) to prevent
excessive heating of the air within the compartment, resulting in reduced performance.
REQUIRED FOR INSTALLATION
 9 Relay 30A
 9 Wire Connector
 9 In Line 30A Fuse
 9 Trailer Connector
MOUNTING
The MiniBoost should be securely mounted to a suitably strong surface. Dimensional
details are provided in Figure 1. The MiniBoost may be mounted in any orientation.
Figure 1: Mounting Dimensions