Product Manual

7
WIRING
It is recommended that the MiniBoost connect to the vehicle through a 30A (minimum)
Isolating Relay and 30A (minimum) fuse. The relay function is to prevent the vehicle
battery from discharging when the vehicle is not in use.
WIRE SIZE
Cables should be sized to carry 30A. The minimum recommended wire size is 5mm
2
.
Wiring resistance, inclusive of connectors should be less than 100mR total (vehicle
battery to MiniBoost input wires).
If the circuit resistance (including fuse, relay and connectors) is too high, the
performance of the MiniBoost may degrade.
FUSING
Over current protection is provided by a 30A automotive fuse (green mini-blade).
Always replace fuse with the same type and rating.