Product Manual

WARNING
Loads connected to +BRK output will not turn off even during ECO mode or
Storage mode. To maintain good health of the battery during low voltage, manually
turn these loads off. Exceeding 40A total load current may turn-off some of the load
outputs 1-14. All loads connected on this output must be individually fused.
14. SOLAR PANEL CONNECTION
This connection is for the solar panel input
15. +BRK BATTERY OUTPUT (40A MATCH RATED)
16. SYSTEM STATUS INDICATOR
Indicates the operational status of the BatteryPlus35-II
WARNING
When braking systems are already connected to the +BRK
output, then non-braking loads must use a separate output.
12. MOUNTING HOLE (X4)
13. LOAD OUTPUT STATUS INDICATORS
LED COLOUR LOAD OPERATIONAL STATUS
GREEN Loads operating normally
RED Fault with load
OFF Load is off
Table 4: LED Status Indicators
This output is an uncontrolled 15th output with a maximum current rating of 40 A.
This is specifically designed for loads which do not need to be isolated or have a
current rating of higher than the inbuilt circuit protection of the individual outputs
and have a current rating less than 40 A. This may include but not limited to:
• BMPRO SwayControl
• BMPRO Trailsafe (+)
• Heaters
• Stereo memory
12