Product Manual

WARNING
Sparks have the potential to cause an explosion if combustible gases are present.
The following procedures are designed to minimise the risk of spark generation
while connecting or disconnecting the battery. The positive terminal of the battery
MUST NOT be connected to the chassis.
Figure 5: Wiring the battery to the
BatteryPlus35-II.
To protect against short-circuits and
reversed battery connections, install
a 40A fuse, as close as possible to the
battery’s positive terminal.
WARNING
Do not install battery in the same compartment
where flammable material, such as petrol, is stored.
WARNING
Before using a battery other than that which was installed at the caravan
dealership, consult with the battery manufacturer for a detailed description of the
installation, uses and maintenance of the battery. Verify that the type and capacity
of the battery or batteries used are compatible for use with the BatteryPlus35-II.
Figure 4 details connection of the caravan battery to the BatteryPlus35-II.
After fitting a new battery to the BatteryPlus35-II, make sure that it is configured in
your battery monitor.
Correctly configuring the battery capacity and profile will ensure that the
BatteryPlus35-II will select the best charging parameters for the caravan battery in
use, and the software accurately estimates battery usage.
REPLACING BATTERIES
20