Product Manual

FAQS AND TROUBLESHOOTING
Need more help troubleshooting your BatteryPlus35-II?
Contact our customer service team online at teambmpro.com/technical-support or
check out our how-to videos on our YouTube channel at youtube.com/c/bmproau
BATTERY
I’ve fitted a battery to the BatteryPlus35-II, but it’s not detected by my BMPRO
battery monitor?
Check the following:
1. Battery connections are tight and not loose or corroded.
2. Battery polarity, red lead-positive, black lead-negative.
3. The dealership fitted in-line fuse with the caravan battery
is fitted and not blown. Correct value is 40A.
CARAVAN LOADS
I think one of my loads is not receiving power?
The load may be faulty, activating the protective electronic fuse and turning the load
off. If this is the case, the Load Status Indicator LED for that load will flash red.
Should you encounter any faulty loads, please contact your caravan dealership.
None of my loads appear to be powered but I can still use my battery monitor?
All loads will power down, but the battery monitor will still be in use if the
BatteryPlus35-II was put into ECO Mode. The BatteryPlus35-II will be put into
ECO Mode if:
1. The user pressed the Battery icon on their battery monitor.
Check to see that the Battery icon on you monitor has been pressed on, which
turns power off to the caravan loads.
2. The BatteryPlus35-II has entered ECO Mode and to conserve remaining battery
charge will disable power to caravan loads.
Connect the BatteryPlus35-II to a power source and begin battery charging.
28