Product Manual

5. AUX+

Connection point for external DC input positive.

6. BATT+

Connection point for battery positive and negative terminal.

Attach fuse to Batt+ wiring

7. BATT-

8. NOT USED

9. RESET (MASTER RESET BUTTON)

Press the Master Reset Button if any part of the system is

unresponsive or not operating correctly during or after installation

10. CAN BUS COMMUNICATION CONNECTOR

To connect to and power BMPRO accessories (BC300 + CommLink

External Shunt or OdysseyLink) or monitors (RVView or Trek).

11. REMOTE SWITCH TERMINAL BLOCK (RSW)

Terminal block for connecting an optional remote switch. This switch

is used to disconnect the loads from all power

Terminals are labelled according to their designated load output

Table 3: Designated terminal-load outputs

TERMINAL OUTPUTS LOAD RATING

1 Tablet / Spare 15A

2 Spare 15A

3-9 Spare 10A

10 Light 1 10A

11 Light 2 10A

12 Light 3 10A

13 Pump 1 10A

14 Pump 2 10A