Product Manual

WARNING
If the supply cord is damaged, it must not be
replaced and the appliance should be scrapped.
MOUNTING
BatteryPlus35-II should be securely mounted to a suitably rigid surface, using four
pre-drilled mounting holes. Dimensions are provided in Figure 3: Mounting Diagram.
MAINS CABLE
This is pre-cabled and fitted with a mains plug. Ensure that the connections to the
mains supply is in accordance with the national wiring rules, and that the earth
connection is installed, see Mounting Diagram, Figure 3. The mains cable must be
at least 80mm away from the output cables. All DC connections should be wired
according to Figure 2: Wiring diagram.
The plug must be accessible during installation. If this is not possible, an accessible
mains disconnection switch must be incorporated in the mains wiring where the plug
is connected.
Figure 2: Mounting Diagram
17