Product Manual

None of my loads appear to be powered and the screen on my battery monitor has
turned off?
All loads, including any battery monitor in use with the BatteryPlus35-II will power
down if the BatteryPlus35-II was put into Storage Mode. The BatteryPlus35-II will be
put into Storage Mode if:
1. The user activated the switch connected to the BatteryPlus35-II RSW input.
This turns off power to all caravan loads and accessories connected to the
BatteryPlus35-II CAN bus such as your battery monitor.
Check that the switch has not been activated.
2. 2. The BatteryPlus35-II has entered Storage Mode and to conserve remaining
battery voltage will disable power to all caravan loads and accessories connected
to the BatteryPlus35-II CAN bus.
Connect the BatteryPlus35-II to a power source and begin battery charging.
SOLAR
My solar output appears lower than expected?
If the battery is close to fully charged, the BatteryPlus35-II will periodically turn off
solar to protect the batteries from overcharging. As a result, you may see less output
on your solar display.
The following tips will ensure you are getting the most of your solar set-up:
1. Make sure your solar panels are clean
For optimal performance of your solar panels, regularly clean them (when cool)
with warm, soapy water.
2. Consider the location of your caravan/RV
A shadow (for example from trees, buildings and even other accessories on the
roof of your caravan) across any part of the solar panel can reduce the panel
performance by up to 80%.
3. The time of day, month and year is important
In some parts of the year (especially in southern parts of Australia) the sun will
never be directly overhead, so your solar output will be reduced-sometimes by
up to 50%.
29