Operation Manual

Everything under control
76
7. Turn the controller until "Set time" is
selected and press the controller.
Adjusting settings
8. Turn the controller to set the hours and
press the controller.
9. Turn the controller to set the minutes and
press the controller.
The system accepts the new time.
Switching on the hour signal*
You will hear three tones just before each full
hour.
Select "Hour memo" and press the controller.
The hour signal is activated.
Setting the 12h/24h format
1. Select "Time format" and press the control-
ler.
2. Select the desired format and press the
controller.
Date
The settings are stored for the remote control
currently in use, refer also to Personal Profile on
page 28.
Setting the date
In the instrument cluster
To set the DD.MM or MM/DD date format, refer
to Setting the date format.
1. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the date and the word "SET".
2. Press button 2.
3. Use button 1 to set the day of the month.
4. Press button 2 to confirm the entry.
5. Set the month and the year in the same way.
6. Press button 2.
The system stores the new date.
Via iDrive
iDrive, for operating principle refer to page 16.
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Turn the controller until "Settings" is
selected and press the controller.
4. Select "Time / Date" and press the control-
ler.
5. Select "Date" and press the controller.
6. Select "Set date" and press the controller.
The first setting of the date display is now
highlighted, in this case the day.
7. Turn the controller to make the adjustment.
Online Edition for Part no. 01 41 0 014 954 - © 02/08 BMW AG