Installation Guide

6
The short water line is HOT water, while the longer water line is COLD. Securely attach
both HOT (Red - 1) and COLD (Blue - 2) water hoses to the faucet. Attach the weight
(3) onto the pull out hose at your desired location. Note: The weight should NOT make
contact with the faucet line hoses when the faucet head is pulled out.
Connect the pull out hose (1) to the line converter (2). Be sure to insert the rubber
washer (3) into the line converter before connecting the hose.
Installation Instructions
Step 5
Step 6
1
2
3
2
1
3