Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-354 Rev.10/10/14 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2014 by Bobrick Washroom Equipment, Inc.
INSTALLATION:
Mounts in toilet partition 1/2" to 1-1/4" (13 x 32mm) thick, centered through a cutout specially ordered from partition
manufacturer or field cut. Dimensions of cutout are to be 11" wide x 15-1/2" high (280 x 395mm). For factory-made cutouts,
location and size details should be furnished to partition manufacturer. For hollow-core metal partitions, solid framing into
which mounting sheet-metal screws can be secured is required.
For installation with sheet-metal screws furnished, place unit firmly in partition opening, making sure the entire perimeter of
fixed flange is tight against partition surface, then secure to partition with sheet-metal screws furnished, through four holes in
fixed flange at points indicated by an S. On other side of partition, position adjustable flange so the mounting screw holes
are not inline with mounting screw holes in fixed flange. Make sure the entire perimeter of adjustable flange is tight against
partition surface, then secure with sheet-metal screws furnished.
For through-bolting method of installation, make sure that mounting holes in adjustable flange are inline with holes in fixed
flange. Using adjustable flange as template for locating centers, drill 7/32" or 1/4" (5.5 or 6.4mm) holes through partition.
Provide four binder post and #6 (3.5mm) flat-head sheet-metal screws to secure unit and its adjustable flange. Obtain binder
posts and sheet-metal screws by ordering Bobrick Binder Post Kit No. 354-119 for partitions 1/2" (13mm) thick or Kit No.
354-124 for partitions 3/4" to 1-1/4" (19 to 32mm) thick.
Designer's Note: Cutouts in Bobrick toilet partitions can be pre-cut for Bobrick partition-mounted accessories at factory if
location and size of cutouts are specified and the order for both partitions and accessories are received together.
SPECIFICATION:
Partition-mounted sanitary napkin disposal shall be type-304 stainless steel with all-welded construction; exposed surfaces
shall have satin finish. Flanges shall be drawn and beveled, one-piece seamless construction. Unit shall mount in partition and
serve two toilet compartments. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped
with a tumbler lock keyed like other Bobrick washroom accessories. Unit shall have a self-closing panel covering each disposal
opening. Panels shall have bottom edges hemmed for safety, be secured to door with spring-loaded, full-length stainless steel
piano-hinges, and equipped with international graphic symbols identifying sanitary napkin disposal. Unit shall be furnished with
a removable, leak-proof molded polyethylene receptacle. Receptacle shall have a capacity of 1.2-gal. (4.6-L).
Partition-Mounted Sanitary Napkin Disposal shall be Model B-354 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.