Use and Care Manual

Remote Buttons
Quick Start
Remote Control
Remote Buttons
1 Power
Puts Bob in and out of standby mode.
2 Auto
Sends Bob to clean on his Auto 1 (Deep Clean) mode.
3 Corners
Sends Bob to clean on his Wall Follow (Wall Track™) mode.
4 UV
Activates or deactivates the UV light.
5 Spot
Sends Bob to clean on his Spot 1 (Spiral Track™) mode.
6 Charge
Sends Bob to his charging station.
7 Speed
Alternates between Bob’s two speeds.
8 Navigational Arrows
Guide Bob forward, backward, left, or right.
9 Pause
Pauses or resumes Bob’s movement.
1
2
3
4
5
6
7
8
9
8
8 8
Bob’s remote requires
2 AAA batteries (not
included). Remove the
batteries if you are not
using the remote on
a regular basis. Keep
the remote at room
temperature.
Hold down the navigational
buttons to keep Bob moving
in the desired direction. Do
not reverse Bob towards
edges, as he will fall.
Quick Tip:
!
4039