Use and Care Manual

Quick Start
Cleaning Schedule
Setting the Cleaning Schedule
Setting the Cleaning Schedule
Bob can be programmed to clean at the same time on multiple days of the week through his
charging station. Before proceeding, make sure Bob is turned ON and synced to his station, and
the current time and day are set.
The charging station will
display a broom icon when
the cleaning schedule is
active.
1. Press the button on the station.
The rst hour digit will start ashing.
2. Use the ADJUST/SELECT button to adjust
your selection. Use the button to move
between minutes, hours, and days of the week.
3. To select a day of the week, wait until
the day stops blinking before pressing
the ADJUST/SELECT button to move
on. To deselect a day, scroll past it while
it is still blinking. Selected days will be lit.
4. Press the OK/CYCLE button to save your
settings. Bob will chirp to conrm your
save.
To clear Bob’s schedule,
scroll past each day of the
week while it is still blinking.
The days of the week that
are selected will be lit.
Quick Tip:
Important to Note:
Parts You’ll Need: Charging Charging
Adapter Station
SET Su Mo Tu We Th Fr Sa
CLK
1
2
Bob works on a 24-hour clock, so adjust accordingly.
!
SET Su Mo Tu We Th Fr Sa
CLK
1
2
SET Su Mo Tu We Th Fr Sa
CLK
1
2
SET Su Mo Tu We Th Fr Sa
CLK
1
2
SET Su Mo Tu We Th Fr Sa
CLK
1
2
4847