Owner`s manual

11
WALKING BELT CENTERING
The walking belt may occasionally need to be centered. First be certain that the
belt is tensioned properly. Start the treadmill and run it at about 4 mph. Place the
hex key through the hole in the left rear end cap and into the socket of the
adjustment screw. (See picture below)
1. If belt has moved too far to the right:
Turn the left adjustment screw ½ turn counter clockwise. Let the treadmill run for
30 seconds and the belt should move to the left. If it still is too far to the right, turn
the left adjustment screw an additional ½ turn. Repeat as needed.
2. If belt has moved too far to the left:
Turn the left adjustment screw ½ turn clockwise. Let the treadmill run for 30
seconds and the belt should move to the right. If it still is too far to the left, turn
the left adjustment screw an additional ½ turn. Repeat as needed.
Continue to run the treadmill 3 minutes to ensure the belt has been centered.
Make any adjustments as needed.