Owner`s manual

WALKING BELT AND DECK LUBRICATION

It’s important to take good care of your treadmill deck (the walking surface underneath

the belt), because the belt/deck friction may affect the function and life of your treadmill

and requires periodic lubrication.

Your treadmill belt has been lubricated at the factory, but periodic lubrication will extend

the life of your treadmill belt, board, and electrical components. We recommend the

following lubrication schedule based on weekly usage:

LUBRICATION APPLICATION

1. Use a coin to open the tank covers on the end caps. Put ½ the lubrication bottle

that is in the spare parts box into the left tank, and ½ the lubrication in the right tank.

Replace the tank covers.

2. Start the treadmill and set the speed at 2.5 mph. Let the belt run for about 15

minutes in order to spread the lubrication on the underneath side of the belt.