Owner`s manual

30
DISPLAYS
DOT MATRIX :
The 8x10 dot matrix reflects incline on the elevation programs (Program 1-4, 7,
10-11) and speed on the speed programs (Program 5-6, 8-9) and the user
programs. On programs 12-15 and in the manual mode, the dot matrix displays a
400 meters running track.
INCLINE/PULSE :
Displays pulse rate except when elevation is changed. To get a pulse rate, place
both of your hands on the pulse grip bars. It is recommended to straddle the
walking belt to get an accurate reading. If you are walking or jogging, it is difficult
for the monitor to accurately read your pulse rate. Elevation range is from 0% to
12%.
TIME/PACE :
Shows workout Time. Time begins at 00:00 and counts up. The maximum time
is 99:59. Pace is minutes per mile and is displayed when the SELECT key is
pressed. When the safety key is inserted, this display shows the accumulated
distance (odometer) for three seconds.
SPEED :
Displays the speed the treadmill belt is moving. Speed range is from 0.5 mph to
11 mph.
DISTANCE/ELEVATION GAIN :
Displays the distance, in miles, the treadmill belt has gone on the current workout.
When SELECT key is pressed during workout, it will display Elevation in meter, the
user has climbed during the current workout.
CALORIES/CALORIES PER HOUR :
Displays calories consumed. Estimated calories per hour being consumed is
displayed when the SELECT key is pressed.