Data Sheet

3 System Configurations available:
• CORE 8X8 (8 inputs, 8 outputs) • CORE 4X12 (4 inputs, 12 outputs) • CORE 12X4 (12 inputs, 4 outputs)
Configurations
Description
Universal
Audio Processor
Designed for small to medium installations, The CORE is a highly versatile drag-and-drop DSP processor. Hardware
system configuration is highly flexible in blocks of 2 for 4 in/12 out, 6 in/10 out, etc. configurations. Expandability is also
ensured by stacking multiple processors for a very high number of inputs and outputs. Front panel knobs can be
programmed to map to any functions within the DSP library and can be scaled to match the requirements of the project.
Up to 53 minutes of audio storage is built-in to the box and audio files can be activated via a built-in scheduler, any of
16 resident TTL inputs, or via an end user GUI interface custom built for each application. System design is PC based.
The software system design is PC based. Once connected, The CORE software, allows for design, downloading, reversal
of in-box designs, and live monitoring, calibration, and routing via the PC. Third-party control systems such as Crestron,
AMX, Vity and others can also control The Core either via RS-232 or IP commands. Up to 12 CORE units can be networked
together for expandability. A variety of accessories, including low cost analog controllers (RAC), digital controllers (URC),
and various paging and control microphones (PPM, PPM Touch) are available for use with the system.
Specifications subject to change without notice.
© 2012 Bogen Communications, Inc. 54-8023-58B 1207
• Delays: 5 ms to 2000 ms
• Dynamics: AGC (mono and stereo), Automatic
Noise Sensing, Compressor, Comp-limiter, Expander
(mono and stereo), Ducker (mono and stereo), Mono
and Stereo Gate, Voice Gate, Gate with Sidechain
• Equalizers: Mono and Stereo GEQ (1 Octave, 2/3
Octave, 1/3 Octave), Mono and Stereo PEQ
(2, 4, 6, 8, 10, 16 bands)
• Feedback Cancellation: Dynamic Feedback
cancellation 1/5, 1/10, 1/20, and 1/100 Octave
with 4, 8, 12, or 16 bands
• Inverter
• Level Controls: 4x4, 8x8, 16x16
• Local Echo Suppression Module
• Meters: 1 CH, 4 CH, 8 CH, 16 CH Peak/RMS
• Logic: AND, NOT, OR, NOR gates with Net
Input/Output for network applications
• Message Repeater: Up to 53 minutes of audio can be
stored inside the box and output 2 separate messages
simultaneously to independent zones; messages can be
activated using TTL inputs or via the built-in Scheduler
• Mixers: Automixers, Automixers with Mix Minus, Matrix
Mixers, Standard Mixers, and Room Combiner
• Noise Generator: White, Pink, Tone
• Page Control Module – For zone paging applications
• Selectors: 4x1, 5x1, 6x1, 7x1, 8x1, 16x1, 32x1
for use with Third-Party control or ATEIS RAC,
URC remote controllers
• Custom Components: Build your own program
within the program and password protect it
Software
Components
• Main Frame: 4 slots for input/output cards,
16 TTL/Analog Inputs, 8 TTL Outputs, RS485,
RS232 Port, Ethernet Port
• Output Card: 4 Channels with individual Overload
Indicator, Mute, Meter, Signal Present, Level Control,
and adjustable Overload Threshold
• Input Card: 4 Channels with individual Bypass, Mute,
Sensitivity Select, Phantom Power, Mute, RTO (route
to output), VU Meter, Signal Present, Level Control
and adjustable Overload Threshold
Hardware
Components
• Up to 16 analog inputs/outputs
• Configuration via PC/Laptop
• Programmable, scalable front panel knobs for
DSP functions
• Third-party control via RS-232 or IP commands
• Full DSP drag-and-drop component library
• Up to 53 minute built-in message storage
• 16 built-in TTL inputs and 8 logic outputs
• Stack up to 12 units
• CE and UL listed
• 5 year warranty
Features