Manual

C H A P T E R 2 - I N S T A L L A T I O N
9
EPM-1 Power Module
The EPM-1 power module is a connection point for sending DC power up to the field mill
and connecting to analog signals from the field mill.
Figure 7: EPM-1 Power Module Connectors
Field Mill Power Cable Connector
Connect the black cable from the EPM-1 Power Module’s field mill power connector to
the field mill power connector. The cable supplies 12VDC to the field mill and carries the
analog output signals back to the EPM-1. See the Lightning Hazard caution in the EPM-1
Analog Output section of this manual.
Power Supply Connector
Connect the provided 12VDC power supply to the EPM-1’s power supply connector.