Owner's manual

L I G H T N I N G / 2 0 0 0
10
1010
10
In version 5.4 and later, the use of CID (Compact Intercloud
Discharge) strokes can identify many more nearby lightning
flashes with a high degree of accuracy and a false alarm rate of
nearly zero. Also, the option to require nearby flashes to
include CID strokes is now available (Options | Settings…
from the main menu). This option can reduce the false alarm
rate for identifying nearby flashes using the previously proven
technique (first included in version 4.6) to zero. However if
storms in your area typically do not produce CID strokes,
then this option should not be enabled.
System Requirements
• The Boltek lightning detector is required for
detection of lightning.
• A Pentium 1 GHz processor or faster is
recommended for lightning detection.
• At least 256 MB of memory is recommended
above and beyond the amount of memory
required by Windows.
• Windows XP, Windows Server, Windows Vista,
Windows 7 (32-bit and 64-bit versions) and
Windows 8 (32-bit and 64-bit versions) are
supported. (Only Windows XP is supported
when using the old ISA StormTracker card.)
• 10 Mb of hard-drive space is required for the
basic installation, though daily archive files will
eventually consume much more than this.
• A graphics card with at least 640x480 resolution
with at least 32K colors is strongly
recommended. Unexpected artifacts will occur if