Owner's manual

R E A L - T I M E L I G H T N I N G D E T E C T I O N
299
299299
299
Percent and Ratio Keywords
Each of these keywords may be used with a ( N ) parameter.
If the ( N ) parameter is not used, the keyword returns the
percentage or ratio in the last minute.
The parameter "N" may be either a positive integer, or a
positive real number. Real numbers less than 1 must start
with a zero.
For example, "0.1" is a valid parameter, but ".1" is not.
Legal values for the parameter N range from 0 to 60. Values
for N greater than 60 will not return the correct value.
Keywords are not case sensitive, so @PercentageICFlashes
is identical to @percentageicflashes or
@PERCENTAGEICFLASHES.
@PercentageCGPositiveFlashes( N )
The percentage of CG flashes that are +CG flashes in
the last N minutes. The percentage is a number
between 0 and 100.
@PercentageCIDFlashes( N )
The percentage of total flashes that are CID flashes in
the last N minutes. The percentage is a number
between 0 and 100.
@PercentageICFlashes( N )
The percentage of total flashes that are IC flashes in
the last N minutes. The percentage is a number
between 0 and 100.