Operator`s manual
FOREWORD
The operator manual and the
Snowmo-
bile Safety Handbook have been prepa-
red
to
acquaint the owner/operator or
passenger of a new snowmobile with the
various vehicle controls, maintenance
and safe operating instructions. Each
is
indispensable
for
the proper use
of
the
product, and should
be
kept with the ve-
hicle at all times.
Should
you
have
any questions pertaining
to the warranty and its application,
please
consult the ''Often Asked Questions'' sec-
tion
of
this manual, or your authorized
dealer.
This manual uses the following symbols.
•
WARNING: Identifies
an
instruc-
tion which, if not followed, could
cause serious personal
injuries
including
possibility of death.
-.r
CAUTION: Denotes
an
instruction
T which, if not followed, could se-
verely damage vehicle components.
0
NOTE: Indicates supplementary in-
formation needed to fully complete
an
instruction.
Although the mere reading of such infor-
mation does
not
eliminate the hazard,
your understanding
of
the information
will promote its correct use .
•
WARNING:
The
engines and
the
corresponding components iden-
tified
in
this manual should not be uti-
lized
on
product(s) other th9n those
mentioned on
the
cover page
of
this
manual.
The information, illustrations and
com-
ponents/system descriptions contained
in
this manual are correct at time
of
pu-
blication. Bombardier
Inc.
however, main-
tains a policy of continuous improvement
of its products without imposing upon it-
self any obligation to install them on prod-
ucts previously manufactured.
Bombardier
Inc.
reserves the right at any
time to discontinue or change specifica-
tions, designs, features, models or equip-
ment
without
incurring obligation.
The illustrations
show
the typical con-
struction of the different assemblies and,
in
all cases, may
not
reproduce the full
detail or exact shape of the parts shown,
however, they represent parts which
have
the same or a similar function.
Most specifications
are
given
in
both met-
ric and customary units. Where precise
accuracy
is
not
required, some conver-
sions are rounded
to
even numbers
for
easier
use.
A shop manual
can
be
obtained for com-
plete service, maintenance and repair in-
formation.
-.r
CAUTION:
Several components
T of this vehicle are built with parts
dimensioned
in
the metric system. Most
fasteners are metric and
must
not
be
replaced
by
customary fasteners
or
vice
versa. Mismatched
or
incorrect fasten-
ers could cause damage to the vehicle
or
possible personal
injury.