Owner`s manual

BONAIRE DURANGO WINDOW COOLER
Introduction
WEAC628
Introduction
GENERAL INFORMATION.
Thank you for purchasing a quality Bonaire Evaporative Cooler. We care about your
safety and would ask you to spend a few minutes reading these simple instructions
before installing or operating this product.
Safety!
Read carefully all of these instructions prior to installing
and operating the unit.
• Read and Save these Instructions. Do not throw these Instructions away.
• Installation of this cooler in any manner not prescribed by these instructions could
cause a safety issue and WILL void any warranty.
• Use only with a 240V 50Hz single phase grounded outlet.
• Unplug the cooler and position the rotary control knob to the 0 position when installing,
servicing or cleaning.
• Do not operate cooler with Rear filter panel removed.
• Do not operate cooler with a damaged cord, plug or other component.
• Do not run the power cord under carpet or other floor covering.
• Do not use the power cord with an adaptor plug that converts the 3 pin plug into a 2
prong connector.
• Do not use the cooler with an improperly grounded outlet...
• Do not alter or modify this cooler.
• Do not allow children to install, operate or service this cooler.
• fire or electric shock, do not use this product with any
solid state speed control device.
• ement or servicing of switches, or electrical
•
.
ections for correct mounting are adhered to for the SAFE
• m 100mm (4”) clearance above the external cabinet for
maintenance purposes.
WARNING: To reduce the risk of
Use only qualified electricians for replac
motors and components in this cooler.
This Window Mounted Cooler is suitable for installation in windows (either sash hung
or sliding) with a minimum opening width of 650mm (26”) and height of 550mm (22”)
Please ensure that the dir
operation of this Cooler.
Ensure there is a minimu
Page 3