FAQ

Prior to applying Bondera a new wall should be installed as smooth and level as possible. For an
existing wall it is recommended to ensure that the wall is level and make adjustments with a joint
compound. If the tile does not lay flat against the Bondera because it is warped or otherwise defective,
then it is recommended to discard the tile or apply a construction adhesive to the tile to fill any gaps to
ensure proper bond to Bondera.
What is the best method to remove Bondera Tile MatSet residue on a surface?
The best way to remove Bondera residue on objects/surfaces is by applying an adhesive remover such
as Goo Gone® or Goof Off® to the area. Bondera Tile MatSet is also prepackaged with a waxy paper
donut on each end that can be left on to eliminate sticking to objects when standing upright.