Datasheet

20.02.2020
Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: [phone] / 969 - 0 | E-Mail: [e-mail] | Internet: www.bopla.de
Cable glands / General Accessories
Universal DIN rail holder TSH 35, polyamide
TSH 35
Order no.: 22035000
* = Available on request.
Characteristics
Colour of enclosure group
black
Colour of enclosure group
Black, similar to RAL 9005
Scope of delivery
1 DIN rail holder, screws for enclosure mounting
Note
This DIN rail holder consists of a base and a bolt. The bolt can be snapped into the base in different positions. This makes it ideal for use
with enclosure heights between 70 mm and 160 mm. It is fitted approximately in the middle of the enclosure, and the bolt projecting
from the enclosure base can be disconnected from the rail by means of a screwdriver in the normal way. For assembly, insert the
screws (enclosed) from the inside of the enclosure. This guarantees full insulation protection. On small enclosures, the part of the bolt
which projects upwards can be pinched off. In the case of very wide enclosures, it may be necessary to fit two DIN rail holders.
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensation element.
» Additional information
Technical documentation / Downloads
Technical drawings
3D product data in STEP format: Registration necessary
Product drawing in PDF format: 22035000 TSH-35.pdf (85.2 KB)
Product drawing in DXF format: 22035000 TSH-35.dxf (508.8 KB)
Product information
Cable Glands General Accessories GB.pdf (2.6 MB)