Owners Manual
Table Of Contents
- _
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Oven operation
- 7.1 Setting the heating mode and temperature
- 7.2 Turning the oven off
- 7.3 Temperature range by heating mode
- 7.4 Heating time limitation
- 7.5 Fast preheat
- 7.6 Meat probe
- 7.7 Turning the panel lock on or off
- 7.8 Kitchen timer
- 7.9 Oven timer
- 7.10 Sabbath mode
- 7.11 Basic settings
- 7.12 General tips for heating modes
- 7.12.1 How to use bake mode
- 7.12.2 How to use convection bake mode
- 7.12.3 How to use convection multi-rack/true convection mode
- 7.12.4 How to use pizza mode
- 7.12.5 How to use roast mode
- 7.12.6 How to use convection roast mode
- 7.12.7 How to use convection broil mode
- 7.12.8 How to use proof mode
- 7.12.9 How to use warm mode
- 7.13 Getting the best results
- 8 Cooktop operation
- 8.1 Turning the cooktop on
- 8.2 Turning the cooktop off
- 8.3 Cooking zone settings
- 8.4 Recommended cooking settings
- 8.5 FlexInduction™ cooking zone
- 8.5.1 Cookware recommendations for the flexible cooking zone
- 8.5.2 Using the flexible zone as two separate cooking zones
- 8.5.3 Activating the FlexInduction™ function
- 8.5.4 Changing the power level for the flexible cooking zone
- 8.5.5 Adding cookware to the flexible cooking zone
- 8.5.6 Deactivating the FlexInduction™ function
- 8.6 PowerMove® function
- 8.7 Kitchen timer
- 8.8 Count-up timer
- 8.9 SpeedBoost®
- 8.10 ShortBoost
- 8.11 Keep warm
- 8.12 AutoChef®
- 8.13 Panel lock
- 8.14 Wipe protection
- 8.15 Basic settings
- 8.16 Energy consumption display
- 8.17 PowerManager function
- 8.18 Induction cooking
- 9 Warming drawer operation
- 10 Cleaning and maintenance
- 11 Troubleshooting
- 12 Disposal
- 13 Customer service
- 14 STATEMENT OF LIMITED PRODUCT WARRANTY
- fr-ca
- Table des matières
- 1 IMPORTANTES CONSIGNES DE SÉCURITÉ
- 1.1 Définitions des termes de sécurité
- 1.2 Indications générales
- 1.3 Utilisation prévue
- 1.4 Restriction sur le groupe d'utilisateurs
- 1.5 Utilisation sécuritaire
- 1.6 Sécurité des enfants
- 1.7 Sécurité alimentaire
- 1.8 Fonction de nettoyage
- 1.9 Installation et entretien appropriés
- 1.10 Mises en garde conformément à la proposition 65 de l'État de Californie
- 2 Prévenir les bris matériels
- 3 Protection de l'environnement et économies
- 4 Description de l'appareil
- 5 Accessoires
- 6 Avant d'utiliser pour la première fois
- 7 Fonctionnement du four
- 7.1 Réglage du mode de chauffage et de la température
- 7.2 Éteindre le four
- 7.3 Plage de température par mode de chauffage
- 7.4 Limitation du temps de chauffage
- 7.5 Préchauffage rapide
- 7.6 Sonde thermométrique
- 7.7 Activer ou désactiver le verrouillage du panneau
- 7.8 Minuterie de cuisine
- 7.9 Minuterie du four
- 7.10 Mode sabbat
- 7.11 Réglages de base
- 7.12 Conseils généraux pour les modes de chauffage
- 7.12.1 Comment utiliser le mode de cuisson
- 7.12.2 Comment utiliser le mode de cuisson par convection
- 7.12.3 Comment utiliser le mode de convection multi-grille/vraie convection
- 7.12.4 Comment utiliser le mode pizza
- 7.12.5 Comment utiliser le mode de rôtissage
- 7.12.6 Comment utiliser le mode de rôtissage par convection
- 7.12.7 Comment utiliser le mode de cuisson au gril par convection
- 7.12.8 Comment utiliser le mode de fermentation
- 7.12.9 Comment utiliser le mode maintenir au chaud
- 7.13 Obtenir les meilleurs résultats
- 8 Fonctionnement de la table de cuisson
- 8.1 Mise en marche de la table de cuisson
- 8.2 Mise à l'arrêt de la table de cuisson
- 8.3 Paramètres de la zone de cuisson
- 8.4 Paramètres de cuisson recommandés
- 8.5 Zone de cuisson FlexInduction™
- 8.5.1 Recommandations de batterie de cuisine pour la zone de cuisson flexible
- 8.5.2 Utilisation de la zone flexible comme deux zones de cuisson séparées
- 8.5.3 Activer la fonction FlexInduction™
- 8.5.4 Modification du niveau de puissance de la zone de cuisson flexible
- 8.5.5 Ajout d'ustensiles de cuisine à la zone de cuisson flexible
- 8.5.6 Désactivation de la fonction FlexInduction™
- 8.6 PowerMove® fonction
- 8.7 Kitchen timer
- 8.8 Count-up timer
- 8.9 SpeedBoost®
- 8.10 ShortBoost
- 8.11 Garder au chaud
- 8.12 AutoChef®
- 8.13 Verrouillage du panneau
- 8.14 Protection essuyageProtection essuyage
- 8.15 Réglages de base
- 8.16 Affichage de la consommation énergétique
- 8.17 Fonction PowerManager
- 8.18 Cuisson par induction
- 9 Fonctionnement du tiroir réchaud
- 9.1 Niveaux du tiroir réchaud
- 9.2 Allumer le tiroir réchaud
- 9.3 Éteindre le tiroir réchaud
- 9.4 Utilisation du tiroir réchaud en mode Sabbat
- 9.5 Réchauffer des bols et des assiettes vides
- 9.6 Mettre croustillant des articles rassis
- 9.7 Conseils généraux pour le tiroir réchaud
- 9.8 Recommandations de température du tiroir réchaud
- 10 Nettoyage et entretien
- 11 Dépannage
- 12 Élimination
- 13 Service à la clientèle
- 14 ÉNONCÉ DE LA GARANTIE LIMITÉE DU PRODUIT
en-us Cooktop operation
32
8.13 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
CAUTION
The panel lock may be turned on and off accidentally due
to:
▶
water spilled during cleaning
▶
food that has overflowed
▶
objects being placed on the panel lock touch key.
Activating the panel lock
Requirement:The cooktop is turned off.
▶
Touch panel lock/Panel Lock for 4seconds.
a The indicator over the panel lock key lights up for
10seconds.
a The control panel is locked.
Deactivating the panel lock
Requirement:The cooktop is turned off.
▶
Touch panel lock/Panel Lock for 4seconds.
a The control panel is unlocked.
Automatic panel lock
This function automatically activates the panel lock when
you switch off the cooktop.
The automatic panel lock can be activated in the basic set-
tings →
Page32
.
8.14 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating the wipe protection
▶
Press panel lock/Panel Lock.
a The indicator above the panel lock key lights up.
a The control panel is locked for 35seconds.
a After 30seconds a beep indicates that the wipe protec-
tion is about to turn off.
Deactivating the wipe protection
▶
Press panel lock/Panel Lock.
a The indicator above the panel lock key goes out.
8.15 Basic settings
You can configure your appliance to meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display Function
Panel lock
– Manual
1
– Automatic
– Function deactivated
1
Factory setting (may vary according to model)
Display Function
Signal tones
– Confirmation signal and error signal are
off. The main switch signal remains on.
– Only error signal is on.
– Only confirmation signal is on.
– Confirmation signal and error signal are
on.
1
Display energy consumption
– Deactivated.
1
– Activated.
Duration of timer end signal
– 10seconds
1
– 30seconds
– 1minute
Power management function. Limiting the to-
tal power of the cooktop. The available set-
tings depend on the maximum power of the
cooktop.
– Deactivated
1
,
– 1.000W minimum power
– 1.500W
...
– 3.000W recommended for 13A
. – 3.500W recommended for 16A
– 4.000W
. – 4.500W recommended for 20A
...
or . – Maximum power of the cooktop
Changing the preset power levels for Power-
Move®
- Preset power level for the front cooking
zone.
- Preset power level for the middle cook-
ing zone.
- Preset power level for the rear cooking
zone.
Results for suitability test for cookware
– Not suitable.
– Not ideal.
–Suitable.
Configuring status of FlexInduction™ cooking
zone when the cooktop is turned on
– As two independent cooking zones
1
– As a joined cooking zone.
Restore factory settings
– Off
1
– Restore appliance to factory settings
1
Factory setting (may vary according to model)
Changing the basic settings
Requirement:The cooktop is turned off.
1. Turn on the cooktop.
2. Within the next 10seconds, press kitchen timer/Timer
for about 4seconds.
The first four displays provide the product information.
To call up the individual displays, touch the control
panel.
Product information Display
Customer Support index (CI)
Production number
Production number1