Owners Manual
Table Of Contents
- _
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Oven operation
- 7.1 Setting the heating mode and temperature
- 7.2 Turning the oven off
- 7.3 Temperature range by heating mode
- 7.4 Heating time limitation
- 7.5 Fast preheat
- 7.6 Meat probe
- 7.7 Turning the panel lock on or off
- 7.8 Kitchen timer
- 7.9 Oven timer
- 7.10 Sabbath mode
- 7.11 Basic settings
- 7.12 General tips for heating modes
- 7.12.1 How to use bake mode
- 7.12.2 How to use convection bake mode
- 7.12.3 How to use convection multi-rack/true convection mode
- 7.12.4 How to use pizza mode
- 7.12.5 How to use roast mode
- 7.12.6 How to use convection roast mode
- 7.12.7 How to use convection broil mode
- 7.12.8 How to use proof mode
- 7.12.9 How to use warm mode
- 7.13 Getting the best results
- 8 Cooktop operation
- 8.1 Turning the cooktop on
- 8.2 Turning the cooktop off
- 8.3 Cooking zone settings
- 8.4 Recommended cooking settings
- 8.5 FlexInduction™ cooking zone
- 8.5.1 Cookware recommendations for the flexible cooking zone
- 8.5.2 Using the flexible zone as two separate cooking zones
- 8.5.3 Activating the FlexInduction™ function
- 8.5.4 Changing the power level for the flexible cooking zone
- 8.5.5 Adding cookware to the flexible cooking zone
- 8.5.6 Deactivating the FlexInduction™ function
- 8.6 PowerMove® function
- 8.7 Kitchen timer
- 8.8 Count-up timer
- 8.9 SpeedBoost®
- 8.10 ShortBoost
- 8.11 Keep warm
- 8.12 AutoChef®
- 8.13 Panel lock
- 8.14 Wipe protection
- 8.15 Basic settings
- 8.16 Energy consumption display
- 8.17 PowerManager function
- 8.18 Induction cooking
- 9 Warming drawer operation
- 10 Cleaning and maintenance
- 11 Troubleshooting
- 12 Disposal
- 13 Customer service
- 14 STATEMENT OF LIMITED PRODUCT WARRANTY
- fr-ca
- Table des matières
- 1 IMPORTANTES CONSIGNES DE SÉCURITÉ
- 1.1 Définitions des termes de sécurité
- 1.2 Indications générales
- 1.3 Utilisation prévue
- 1.4 Restriction sur le groupe d'utilisateurs
- 1.5 Utilisation sécuritaire
- 1.6 Sécurité des enfants
- 1.7 Sécurité alimentaire
- 1.8 Fonction de nettoyage
- 1.9 Installation et entretien appropriés
- 1.10 Mises en garde conformément à la proposition 65 de l'État de Californie
- 2 Prévenir les bris matériels
- 3 Protection de l'environnement et économies
- 4 Description de l'appareil
- 5 Accessoires
- 6 Avant d'utiliser pour la première fois
- 7 Fonctionnement du four
- 7.1 Réglage du mode de chauffage et de la température
- 7.2 Éteindre le four
- 7.3 Plage de température par mode de chauffage
- 7.4 Limitation du temps de chauffage
- 7.5 Préchauffage rapide
- 7.6 Sonde thermométrique
- 7.7 Activer ou désactiver le verrouillage du panneau
- 7.8 Minuterie de cuisine
- 7.9 Minuterie du four
- 7.10 Mode sabbat
- 7.11 Réglages de base
- 7.12 Conseils généraux pour les modes de chauffage
- 7.12.1 Comment utiliser le mode de cuisson
- 7.12.2 Comment utiliser le mode de cuisson par convection
- 7.12.3 Comment utiliser le mode de convection multi-grille/vraie convection
- 7.12.4 Comment utiliser le mode pizza
- 7.12.5 Comment utiliser le mode de rôtissage
- 7.12.6 Comment utiliser le mode de rôtissage par convection
- 7.12.7 Comment utiliser le mode de cuisson au gril par convection
- 7.12.8 Comment utiliser le mode de fermentation
- 7.12.9 Comment utiliser le mode maintenir au chaud
- 7.13 Obtenir les meilleurs résultats
- 8 Fonctionnement de la table de cuisson
- 8.1 Mise en marche de la table de cuisson
- 8.2 Mise à l'arrêt de la table de cuisson
- 8.3 Paramètres de la zone de cuisson
- 8.4 Paramètres de cuisson recommandés
- 8.5 Zone de cuisson FlexInduction™
- 8.5.1 Recommandations de batterie de cuisine pour la zone de cuisson flexible
- 8.5.2 Utilisation de la zone flexible comme deux zones de cuisson séparées
- 8.5.3 Activer la fonction FlexInduction™
- 8.5.4 Modification du niveau de puissance de la zone de cuisson flexible
- 8.5.5 Ajout d'ustensiles de cuisine à la zone de cuisson flexible
- 8.5.6 Désactivation de la fonction FlexInduction™
- 8.6 PowerMove® fonction
- 8.7 Kitchen timer
- 8.8 Count-up timer
- 8.9 SpeedBoost®
- 8.10 ShortBoost
- 8.11 Garder au chaud
- 8.12 AutoChef®
- 8.13 Verrouillage du panneau
- 8.14 Protection essuyageProtection essuyage
- 8.15 Réglages de base
- 8.16 Affichage de la consommation énergétique
- 8.17 Fonction PowerManager
- 8.18 Cuisson par induction
- 9 Fonctionnement du tiroir réchaud
- 9.1 Niveaux du tiroir réchaud
- 9.2 Allumer le tiroir réchaud
- 9.3 Éteindre le tiroir réchaud
- 9.4 Utilisation du tiroir réchaud en mode Sabbat
- 9.5 Réchauffer des bols et des assiettes vides
- 9.6 Mettre croustillant des articles rassis
- 9.7 Conseils généraux pour le tiroir réchaud
- 9.8 Recommandations de température du tiroir réchaud
- 10 Nettoyage et entretien
- 11 Dépannage
- 12 Élimination
- 13 Service à la clientèle
- 14 ÉNONCÉ DE LA GARANTIE LIMITÉE DU PRODUIT
en-us Cooktop operation
34
¡ Controlling the heat supply and safety; the hob in-
creases or decreases the heat supply as soon as the
user changes the setting. The induction cooking zone
stops the heat supply when you remove the cookware
from the cooking zone without you having to switch it off
first.
Cookware
Only ferromagnetic cookware is suitable for induction
cooking.
For example:
¡ Enameled steel cookware
¡ Cast iron cookware
¡ Special stainless steel cookware that is suitable for in-
duction cooking
You can find additional information on which items of
cookware are suitable for the induction cooking under
In order to achieve a good cooking result, ensure that the
ferromagnetic area of the cookware base corresponds to
the size of the cooking zone. If the cookware is not de-
tected on a cooking zone, place it on a cooking zone with
a smaller diameter.
If you use the FlexZone as a single cooking zone, you can
use larger cookware that is particularly suited to this zone.
You can find additional information about the positioning of
the appliances under .
The base of many items of induction cookware is not fully
ferromagnetic:
If you use large cookware with a smaller ferromagnetic
base, only the area that is ferromagnetic heats up. As a
result, the heat is not distributed evenly. The temperature
of the non ferromagnetic area may therefore be too low for
cooking.
Cookware bases that contain aluminum reduce the ferro-
magnetic area. This may reduce the output and the cook-
ware will not be detected sufficiently or at all, and will
therefore not be heated sufficiently.
Unsuitable cookware
Never use flow plates or cookware made of the following:
¡ Thin-walled normal steel
¡ Glass
¡ Clay
¡ Copper
¡ Aluminum
Composition of the cookware base
The material(s) from which the base of the cookware is
made may affect the cooking result. Cookware made of
materials that distribute heat evenly in the pot, such as
saucepans with a stainless steel sandwich base, save
time and energy.
You should preferably use cookware with a flat base be-
cause uneven cookware bases impair the heat supply.
No cookware/cookware of an unsuitable size
If you do not place cookware on the selected cooking zone
or the cookware is made of an unsuitable material or is not
the right size for the cooking zone, the display for the
cooking zone flashes. To make the display go out, place a
suitable item of cookware on the cooking zone. If you do
not place a suitable item of cookware on the cooking zone
within 90 seconds, it automatically switches off.
Empty cookware or cookware with a thin base
Do not heat empty cookware and do not use cookware
with a thin base. The hob is equipped with an internal
safety system. However, empty cookware may heat up so
quickly that the "Automatic switch-off" function does not re-
spond in good time and an excessive temperature is
reached. As a result, the base of the cookware may melt
and damage the glass plate. In this case, do not touch the
cookware; switch off the cooking zone. If the cooking zone
no longer works after cooling down, contact the technical
after-sales service.
Cookware detection
Each cooking zone has a minimum limit for the cookware
detection and this depends on the ferromagnetic diameter
and the material of the base of the cookware. Therefore,
use the cooking zone that best corresponds to the diame-
ter of the pan base.