Owners Manual
Table Of Contents
- _
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Oven operation
- 7.1 Setting the heating mode and temperature
- 7.2 Turning the oven off
- 7.3 Temperature range by heating mode
- 7.4 Heating time limitation
- 7.5 Fast preheat
- 7.6 Meat probe
- 7.7 Turning the panel lock on or off
- 7.8 Kitchen timer
- 7.9 Oven timer
- 7.10 Sabbath mode
- 7.11 Basic settings
- 7.12 General tips for heating modes
- 7.12.1 How to use bake mode
- 7.12.2 How to use convection bake mode
- 7.12.3 How to use convection multi-rack/true convection mode
- 7.12.4 How to use pizza mode
- 7.12.5 How to use roast mode
- 7.12.6 How to use convection roast mode
- 7.12.7 How to use convection broil mode
- 7.12.8 How to use proof mode
- 7.12.9 How to use warm mode
- 7.13 Getting the best results
- 8 Cooktop operation
- 8.1 Turning the cooktop on
- 8.2 Turning the cooktop off
- 8.3 Cooking zone settings
- 8.4 Recommended cooking settings
- 8.5 FlexInduction™ cooking zone
- 8.5.1 Cookware recommendations for the flexible cooking zone
- 8.5.2 Using the flexible zone as two separate cooking zones
- 8.5.3 Activating the FlexInduction™ function
- 8.5.4 Changing the power level for the flexible cooking zone
- 8.5.5 Adding cookware to the flexible cooking zone
- 8.5.6 Deactivating the FlexInduction™ function
- 8.6 PowerMove® function
- 8.7 Kitchen timer
- 8.8 Count-up timer
- 8.9 SpeedBoost®
- 8.10 ShortBoost
- 8.11 Keep warm
- 8.12 AutoChef®
- 8.13 Panel lock
- 8.14 Wipe protection
- 8.15 Basic settings
- 8.16 Energy consumption display
- 8.17 PowerManager function
- 8.18 Induction cooking
- 9 Warming drawer operation
- 10 Cleaning and maintenance
- 11 Troubleshooting
- 12 Disposal
- 13 Customer service
- 14 STATEMENT OF LIMITED PRODUCT WARRANTY
- fr-ca
- Table des matières
- 1 IMPORTANTES CONSIGNES DE SÉCURITÉ
- 1.1 Définitions des termes de sécurité
- 1.2 Indications générales
- 1.3 Utilisation prévue
- 1.4 Restriction sur le groupe d'utilisateurs
- 1.5 Utilisation sécuritaire
- 1.6 Sécurité des enfants
- 1.7 Sécurité alimentaire
- 1.8 Fonction de nettoyage
- 1.9 Installation et entretien appropriés
- 1.10 Mises en garde conformément à la proposition 65 de l'État de Californie
- 2 Prévenir les bris matériels
- 3 Protection de l'environnement et économies
- 4 Description de l'appareil
- 5 Accessoires
- 6 Avant d'utiliser pour la première fois
- 7 Fonctionnement du four
- 7.1 Réglage du mode de chauffage et de la température
- 7.2 Éteindre le four
- 7.3 Plage de température par mode de chauffage
- 7.4 Limitation du temps de chauffage
- 7.5 Préchauffage rapide
- 7.6 Sonde thermométrique
- 7.7 Activer ou désactiver le verrouillage du panneau
- 7.8 Minuterie de cuisine
- 7.9 Minuterie du four
- 7.10 Mode sabbat
- 7.11 Réglages de base
- 7.12 Conseils généraux pour les modes de chauffage
- 7.12.1 Comment utiliser le mode de cuisson
- 7.12.2 Comment utiliser le mode de cuisson par convection
- 7.12.3 Comment utiliser le mode de convection multi-grille/vraie convection
- 7.12.4 Comment utiliser le mode pizza
- 7.12.5 Comment utiliser le mode de rôtissage
- 7.12.6 Comment utiliser le mode de rôtissage par convection
- 7.12.7 Comment utiliser le mode de cuisson au gril par convection
- 7.12.8 Comment utiliser le mode de fermentation
- 7.12.9 Comment utiliser le mode maintenir au chaud
- 7.13 Obtenir les meilleurs résultats
- 8 Fonctionnement de la table de cuisson
- 8.1 Mise en marche de la table de cuisson
- 8.2 Mise à l'arrêt de la table de cuisson
- 8.3 Paramètres de la zone de cuisson
- 8.4 Paramètres de cuisson recommandés
- 8.5 Zone de cuisson FlexInduction™
- 8.5.1 Recommandations de batterie de cuisine pour la zone de cuisson flexible
- 8.5.2 Utilisation de la zone flexible comme deux zones de cuisson séparées
- 8.5.3 Activer la fonction FlexInduction™
- 8.5.4 Modification du niveau de puissance de la zone de cuisson flexible
- 8.5.5 Ajout d'ustensiles de cuisine à la zone de cuisson flexible
- 8.5.6 Désactivation de la fonction FlexInduction™
- 8.6 PowerMove® fonction
- 8.7 Kitchen timer
- 8.8 Count-up timer
- 8.9 SpeedBoost®
- 8.10 ShortBoost
- 8.11 Garder au chaud
- 8.12 AutoChef®
- 8.13 Verrouillage du panneau
- 8.14 Protection essuyageProtection essuyage
- 8.15 Réglages de base
- 8.16 Affichage de la consommation énergétique
- 8.17 Fonction PowerManager
- 8.18 Cuisson par induction
- 9 Fonctionnement du tiroir réchaud
- 9.1 Niveaux du tiroir réchaud
- 9.2 Allumer le tiroir réchaud
- 9.3 Éteindre le tiroir réchaud
- 9.4 Utilisation du tiroir réchaud en mode Sabbat
- 9.5 Réchauffer des bols et des assiettes vides
- 9.6 Mettre croustillant des articles rassis
- 9.7 Conseils généraux pour le tiroir réchaud
- 9.8 Recommandations de température du tiroir réchaud
- 10 Nettoyage et entretien
- 11 Dépannage
- 12 Élimination
- 13 Service à la clientèle
- 14 ÉNONCÉ DE LA GARANTIE LIMITÉE DU PRODUIT
Troubleshooting en-us
45
Fault Cause and troubleshooting
/ The electronics have overheated. All cooking zones have switched off.
1. Wait until the electronics have cooled down sufficiently.
2. Touch any control element.
a When error message disappears, the electronics have cooled down sufficiently.
You can continue to cook.
and the power level flash alter-
nately. A signal tone sounds.
There is hot cookware near the control panel. The electronics are at risk of over-
heating.
▶
Remove the cookware from the control panel.
a You can continue to cook.
and audible signal There is hot cookware near the control panel. The cooking zone has switched off to
protect the electronics.
1. Remove the cookware from the control panel.
2. Wait a few seconds.
3. Touch any control element.
a When error message disappears, the electronics have cooled down sufficiently.
You can continue to cook.
/ The cooking zone has overheated. It has switched off to protect the work surface.
1. Wait until the electronics have cooled down sufficiently.
2. Switch the cooking zone back on.
a You can continue to cook.
+ / and cooking zones not
heating
The cooking zone has been operating continuously for an extended period of time
without interaction. The automatic time limitation has been triggered.
▶
Touch any control element.
a You can set the cooking zone and continue to cook.
The supply voltage is incorrect. It is outside the normal operating range.
/ The supply voltage is incorrect. It is outside the normal operating range.
▶
Contact your electrical utility provider.
The appliance is not connected properly.
1. Disconnect the appliance from the power supply.
2. Make sure the appliance has been connected as shown in the circuit diagram.
and cooking zones do not heat
up
Demo mode is activated.
1. Disconnect the appliance from the power supply for 30seconds by briefly switch-
ing off the circuit breaker in the fuse box.
2. Touch any control within the next threeminutes.
The cookware produces a crack-
ling noise.
The cookware is made from different multilayered materials
▶
Refer to the section on Cooking with Induction to learn more about suitable cook-
ware. →
Page33
You are using cookware of different sizes and different materials.
▶
Refer to the section on Cooking with Induction to learn more about suitable cook-
ware. →
Page33
Additional information
Notes
¡ If lights up on the display, press and hold the touch
key for the cooking zone in question, in order to read
the fault code.
¡ If the fault code is not listed in the table, disconnect the
cooktop from the power supply, wait 30seconds, and
then reconnect it again. If the display appears again,
contact Customer Support and tell them the precise
fault code.
¡ If a fault occurs, the appliance will not switch to standby
mode.
Testing cookware suitability
With this function you can check the speed and quality of
the cooking process for individual pieces of cookware.
Requirements
¡ The cookware is cold.
¡ You have read the recommendations for induction cook-
ing →
Page33
.