User Manual

12 | English
1 609 92A 2AP | (14.3.16) Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Tool holder
2 Opening for drift
3 Gear selector
4 Thread for auxiliary handle
5 Auxiliary handle (insulated gripping surface)
6 Lock-on button for On/Off switch
7 On/Off switch
8 Handle (insulated gripping surface)
9 Drift
10 Reducing sleeve*
11 Tapered arbor*
12 Key chuck*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted noise levels of the product are:
Sound pressure level 86 dB(A); Sound power level 97 dB(A).
Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Drilling into metal: a
h
=3.0m/s
2
, K<1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-1,
EN 50581.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Rotary drill GBM 32-4
Article number
0 601 130 2..
Rated power input
W1500
Output power
W1000
No-load speed
–1st gear
–2nd gear
–3rd gear
–4th gear
min
-1
min
-1
min
-1
min
-1
210
330
470
740
Rotational speed under load
–1st gear
–2nd gear
–3rd gear
–4th gear
min
-1
min
-1
min
-1
min
-1
120
185
265
420
Rated torque (1./2./3./4.gear)
Nm 80/52/36/23
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Max. drilling dia.
– Steel
– Wood
–Aluminium
mm
mm
mm
32
70
50
Tool holder
MK 3 – DIN 228
Weight according to EPTA-
Procedure 01:2014 kg 7.3
Protection class
/II
Rotary drill GBM 32-4
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
OBJ_BUCH-506-005.book Page 12 Monday, March 14, 2016 10:06 AM