User Manual

12 | English
1 609 92A 2AD | (14.3.16) Bosch Power Tools
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 Belt clip
5 Lock-on button for On/Off switch
6 On/Off switch
7 Rotational direction switch (GBM 10 RE)
8 Handle (insulated gripping surface)
9 Screwdriver bit*
10 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted noise levels of the product are:
Sound pressure level 83 dB(A); Sound power level 94 dB(A).
Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Drilling into metal: a
h
=5.0m/s
2
, K=1.5 m/s
2
,
Screwdriving: a
h
=3.0m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards:
EN 60745-1, EN 60745-2-1, EN 50581.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Rotary drill GBM 10 GBM 10 RE
Article number
3 601 D73 1.. 3 601 D73 6..
Rated power input
W 600 600
Output power
W 360 360
No-load speed
min
-1
2600 0–2600
Rated speed
min
-1
1676 1676
Rated torque
Nm 20 20
Spindle collar dia.
mm 43 43
Speed control
– 
Right/left rotation
– 
Max. drilling dia.
– Steel
– Wood
–Aluminium
mm
mm
mm
10
25
10
10
25
10
Chuck clamping range
mm 1 – 10 1–10
Weight according to EPTA-Procedure 01:2014
kg 1.7 1.7
Protection class
/II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_DOKU-27517-003.fm Page 12 Monday, March 14, 2016 8:44 AM