Installation Instructions

19
The dishwasher drain hose may be connected to the drain plumbing using
an air gap in one of two ways:
- Connect to the under sink dishwasher drain connection (25a).
- Connect to a disposer dishwasher drain connection (25b).
NOTE: Place hose clamp (C) around end of drain hose BEFORE connecting
to the plumbing.




23
a b
C
C
IMPORTANT NOTES about your drain connection:
• If local ordinance require an air gap, install it according to the manufac-
turer’s instructions.
• If the dishwasher drain hose is to be connected to a disposer dishwasher
drain connection, remove the plug from the disposer’s dishwasher drain
connection.
• The dishwasher drain hose must have one place along its length that is securely
attached 33″ (84 cm) above the cabinet oor.
• The drain hose length can be extended if necessary. The maximum length
of the drain hose, including the hose leading to the air gap, is 150″ (380 cm).
Drain Connection