User Manual

English | 23
Bosch Power Tools F 016 L81 408 | (18.11.15)
Delivery Scope
Carefully remove the power tool from its packaging and check
if the following parts are complete:
–Chain saw
–Cover
–Chain
–Chain bar
–Oil filler cap
–Chain guard
– Adjusting tool (AKE 30/35/40)
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Rear handle (insulated gripping surface)
2 On/Off switch
3 Lock-off button for On/Off switch
4 Oil filler cap
5 Activation lever for kickback brake (hand guard)
6 Front handle (insulated gripping surface)
7 Nose sprocket (AKE 35 S/1835 S/40 S/35/40/45 S)
8 Chain guard
9 Saw chain
10 Chain bar
11 Gripping teeth
12 Clamping knob (AKE 30 S/35 S/1835 S/40 S/45 S)
13 Cover
14 Chain tensioning knob (AKE 30 S/35 S/1835 S/
40 S/45 S)
15 Extension cable*
16 Power plug**
17 Serial number
18 Adjusting tool (AKE 30/35/40)
19 Chain catch bolt
20 Drive sprocket
21 Fastening bolt
22 Symbol for rotation and cutting direction
23 Oil outlet
24 Guide fin for chain bar
25 Chain tensioning peg
26 Locking nut (AKE 30/35/40)
27 Chain tensioning screw (AKE 30/35/40)
28 Oil level gauge
29 Ventilation slots
** country specific
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Chain saw AKE 30 AKE 35 AKE 40
Article number
3 600 H34 0.. 3 600 H34 0.. 3 600 H34 0..
Rated power input
W16001800 1800
Chain speed (no-load)
m/s 9 99
Chain bar length
cm 30 35 40
Chain type
3/8" – 90 3/8" – 90 3/8" – 90
Drive link thickness
mm 1.1 (0.043") 1.1 (0.043") 1.1 (0.043")
Amount of drive links
45 52 57
Oil reservoir capacity
ml 200 200 200
Automatic chain oiler
 
Nose sprocket
– 
Kickback brake
 
Metal gripping teeth
 
Weight according to EPTA-Procedure 01:2014***
kg 3.9 4.0 4.1
Protection class
/II /II /II
***measured with chain bar and chain
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.25 ohm.
OBJ_BUCH-2245-002.book Page 23 Wednesday, November 18, 2015 12:45 PM