Technical & Specification Information Bosch 32 Series Water Heaters Bosch Commercial Series Condensing & Non-Condensing Continuous Flow Water Heaters
| Technical & Specification Information – Bosch 32 Series Water Heaters Bosch and you, making a difference As part of the Bosch Group, Bosch Thermotechnology products are designed and manufactured to provide customers with the highest levels of quality and reliability which are synonymous with the Bosch name throughout the world. Bosch Thermotechnology has the resources and support capability to offer you the valueadded solutions you deserve.
Technical & Specification Information – Bosch 32 Series Water Heaters | 3 Contents 2 Bosch and you, making a difference 4 The Bosch 32C Commercial Water Heater 6 Features of the 32C water heater 8 Technical Data - 32C 9 Inside Story - Bosch 32C 10 Guidance on installing the Bosch 32C 14 Flueing configurations - 32C 17 The Bosch 32 & 32Q Commercial water heaters 18 Features of the Bosch 32 20 Features of the Bosch 32Q 21 Technical Data - 32 & 32Q industrial applications.
| Technical & Specification Information – Bosch 32 Series Water Heaters The Bosch 32C Commercial continuous flow water heater Global responsibility for nature and the environment Bosch Thermotechnology is committed to environmental protection. Product development is being prioritised in the interests of peoples well being, the economical use of resources and environmental sustainability. In just a few short years, Australia’s domestic heating and hot water industry has changed dramatically.
Technical & Specification Information – Bosch 32 Series Water Heaters | 5 The Bosch water heater at a glance Bosch 32C The Bosch 32C water Heaters features and benefits Features Benefits Part No NG BC3200RANG Continuous flow hot water heater On demand and sustained delivery Part No LPG BC3200RALP Condensing technology High efficiency Natural gas and LPG models Fuel flexibility Up to 3 temperatures controllers Remote temperature control, service and maintenance assistance Water temperature ad
| Technical & Specification Information – Bosch 32 Series Water Heaters The features of the 32C commercial water heater Energy saving condensing design The use of a condensing appliance contributes to achieving higher efficiency by incorporating a secondary heat exchanger. Heat within the flue gases is used to preheat the inlet water, and so recaptures energy that would otherwise be lost.
Technical & Specification Information – Bosch 32 Series Water Heaters | 7 Key benefits to the end user Key benefits to the use High volumes of hot water 3 Multiple showers, sinks and baths used concurrently. Energy savings Cascading Linking up to 6 water heaters together in parallel allows a maximum water flow of up to 192 litres per minute with a 25ºC rise.
| Technical & Specification Information – Bosch 32 Series Water Heaters Technical Data - 32C Bosch 32C Height 615mm Width 464mm Depth 240mm Weight 33 kg Hot/Cold Water Conn 3/4” Condensate Conn 1/2” Gas Connection 3/4” Maximum Output 57.5kW Minimum Input 11 Mj/Hr Maximum Input 217 Mj/Hr Minimum working, Gas Pressure 1.13 kPa (NG) 2.75 kPa (LPG) Maximum Static 3.5 kPa (NG & LPG) Minimum Water Pressure 200kPa Maximum Water Pressure 900kPa Minimum Operating Flow Rate 2.
Technical & Specification Information – Bosch 32 Series Water Heaters | 9 Inside Story – Bosch 32C Flue collar Secondary heat exchanger Anti frost heater Mixing valve Primary heat exchanger Anti frost heater Flame rod Ignition plug Flame rod Condensate neutraliser & trap Igniter Circuit board Main water flow valve Manifold Gas solenoids Fan motor Gas proportional valve unit Water flow sensor Current leakage safety device Remote controller connection terminal Anti frost heater Condensate Drain Outlet H
| Technical & Specification Information – Bosch 32 Series Water Heaters Guidance on installing the Bosch 32C condensing water heater Siting the appliance Clearances for ensuring repair/inspection space The Bosch 32C can be installed in both indoor and The minimum clearances (shown below) should be outdoor applications, with the correct flue accessories. followed to ensure that sufficient room is available for Outdoor installations require a vent cap to be installed servicing the appliance.
Technical & Specification Information – Bosch 32 Series Water Heaters | 11 Casing Dimensions condensate drain from freezing by installing insulation, heat tape or electric heaters. Important points to consider when siting a condensate drainage pipe 3 Ensure the plastic piping is no smaller than ¾” in diameter 3 Use plastic pipe.
| Technical & Specification Information – Bosch 32 Series Water Heaters Outdoor Vent Termination Vertical Vent Termination When installing the Bosch 32C outdoors, a Vent Cap is required (code: BCVC-100C). The following considerations must be made when venting vertically 3 Terminate at least 1.
Technical & Specification Information – Bosch 32 Series Water Heaters | 13 Horizontal and vertical flue terminal positioning O N Flue terminal positions for water heaters in accordance with AS/NZS5601. A C N B,C B,C M F K A F F M G L G E J H, I K L K G D K G 3 The water heater must be installed so that the terminal is exposed to the external air. 3 Pluming may occur at the terminal. Consideration should be given when choosing a terminal location.
| Technical & Specification Information – Bosch 32 Series Water Heaters Bosch 32C water heater Flueing configurations The Bosch 32C water heater uses the 100mm The following considerations should be made when polypropylene flue system supplied by Bosch. planning the installation The maximum flue length is 13m. For every 90 degree 3 Use only Bosch flue materials elbow subtract 2m from the maximum length.
Technical & Specification Information – Bosch 32 Series Water Heaters | 15 Standard horizontal flue assembly with 90° bend Extension horizontal flue with two 90° bends Components Part Numbers Components MG27356 MG85181 MG85176 MG85177 MG87930 Maximum length (mm) & no. of components required 9,000 2 2 2 or more 1 Components MG27356 MG85181 MG85176 MG85177 MG87930 Maximum length (mm) & no.
| Technical & Specification Information – Bosch 32 Series Water Heaters Standard vertical flue - Minimum length Vertical flue - two 45° bends Components Part Numbers Components MG27356 MG85176 MG84862 Maximum length (mm) & no. of components required 500 1 1 Part Numbers MG27356 MG85176 MG85177 MG85182 MG84862 Maximum length (mm) & no.
Technical & Specification Information – Bosch 32 Series Water Heaters | 17 The Bosch 32 and 32Q water heaters Bosch 32 & 32Q Features Part No NG KM3211WHNG KM3211WHQNG* Continuous flow hot water heater On demand and sustained delivery Part No LPG KM3211WHLP KM3211WHQLP* Natural gas and LPG models Fuel flexibility Up to 3 temperatures controllers Remote temperature control and service and maintenance assistance Water temperature adjustment connector Ability to adjust to multiple temperature set
| Technical & Specification Information – Bosch 32 Series Water Heaters The features of the 32 commercial water heater Designed for commercial reliability Commercial The Bosch 32 has been designed for the Australian Suitable for large commercial applications where there is: and New Zealand commercial environment. With a 3 Consistent high demands for DHW – e.g.
Technical & Specification Information – Bosch 32 Series Water Heaters | 19 Ease of installation and maintenance 3 Error codes functionality with optional controller 3 Wall mounted and floor standing options 3 Easy access to components 3 Compact design 3 Internal and external installation 3 Available in 37°C – 83°C 3 Commercial grade heat exchanger Cascading With optional system controllers linking up to 6 water heaters together in parallel allows a maximum water flow of up to 192 litres per minute with a 2
| Technical & Specification Information – Bosch 32 Series Water Heaters The features of the 32Q commercial water heater The Bosch 32Q has been designed for flow and return Extended flue lengths of up to 13m are also possible, applications. With the same 25% thicker commercial helping to provide even greater design flexibility. grade heat exchanger as the Bosch 32, the Bosch 32Q is a hardwearing appliance that will last longer in high demand hot water applications.
Technical & Specification Information – Bosch 32 Series Water Heaters | 21 Technical Data - 32 & 32Q Bosch 32 Bosch 32Q Height 615mm Width 464mm Depth 240mm Weight 29 kg Hot/Cold Water Conn Hot Water Return 32 kg 3/4” Male - 1/2” Male Gas Connection 3/4" Male Maximum Output 55kW Minimum Input 20Mj/Hr (NG) - 18Mj/Hr (LPG) Maximum Input 250 Mj/Hr Minimum Gas Pressure 1.13 kPa (NG) 2.75 kPa (LPG) Maximum Gas Pressure 3.
| Technical & Specification Information – Bosch 32 Series Water Heaters Inside Story – Bosch 32 Flue collar Heat exchanger High limit switch Freeze protection heater Q Hot water outlet thermister Thermal fuse Water flow servo Flame Rod Ignition electrode Site glass Burner sensor Circuit board Manifold Flow water sensor Igniter Transformer Fan motor Earth leakage circuit breaker (ELCB) Gas valve mechanism Water flow sensor Remote controller terminal block Hot water outlet Water drain valve Water va
Technical & Specification Information – Bosch 32 Series Water Heaters | 23 Inside Story – Bosch 32Q Flue collar Water flow servo Heat exchanger Freeze protection thermostat High limit switch Main water control valve Freeze protection heater Q Hot water outlet thermister Thermal fuse Water flow servo Flame Rod Ignition electrode Site glass Burner sensor Circuit board Flow water sensor Manifold Freeze protection heater Igniter Fan motor pump Transformer Earth leakage circuit breaker (ELCB) Gas valve mechan
| Technical & Specification Information – Bosch 32 Series Water Heaters Guidance on installing the Bosch 32 and 32Q water heaters Choosing the location Clearances for ensuring repair/inspection space The Bosch 32 and 32Q can be installed in both indoor and The minimum clearances (shown below) should be outdoor applications, with the correct flue accessories. followed to ensure that sufficient room is available for Outdoor installations require vent caps to be installed servicing the appliance.
Technical & Specification Information – Bosch 32 Series Water Heaters | 25 Connection Dimensions Casing Dimensions Connection dimensions Outdoor clearances to doors & windows Outdoor installations should have the minimum clearances shown below to ensure that flue exhaust Connection Measurements – Bosch 32 cannot enter into surrounding buildings.
| Technical & Specification Information – Bosch 32 Series Water Heaters Guidance on installing the Bosch 32 water heater Horizontal vent termination Vertical vent termination The following considerations must be made when venting The following considerations must be made when venting horizontally vertically 3 Terminate at least 350mm above the ground 3 Terminate at least 1.8m from the combustion air intake 3 Terminate at least 2.
Technical & Specification Information – Bosch 32 Series Water Heaters | 27 Horizontal and vertical flue terminal positioning O N Flue terminal positions for water heaters in accordance with AS/NZS5601.
| Technical & Specification Information – Bosch 32 Series Water Heaters Bosch 32 & Bosch 32Q Flueing configurations The Bosch 32 and 32Q water heaters are flued by the flue kits available. The vertical and horizontal flue kits contain components required for most applications. The maximum acceptable flue length is 13m. For every 90 degree elbow 2m should be subtracted from this length. All internal gas water heaters must be flued and installed with adequate ventilation in accordance with AS/NZS5601.
Technical & Specification Information – Bosch 32 Series Water Heaters | 29 System Layouts Flow and return applications The Bosch 32 has a durable heat exchanger that allows it to withstand the frequent low-fire rates of a flow and return system. To reduce water wastage, a flow and return system will circulate hot water through the pipe work of the property to ensure hot water is immediately available when a tap is opened.
| Technical & Specification Information – Bosch 32 Series Water Heaters System Layouts Bosch 32 water heater Domestic Flow and Return Applications Layout Note: Suitable layout for Bosch 32Q ONLY Vent Cap KMVC-100 Remote Controller RCM3211 Hot water supply Commercial Hot Water 32 Commercial Hot Water 32 Commercial Hot Water 32 Bosch 32 Water Heater Cascade Application Layouts Note: Suitable layout for Bosch 32 & 32C ONLY Legend Commercial Hot Water 32 Commercial Hot Water 32 Commercial Hot
Commercial Hot Water 32 Commercial Hot Water 32 Commercial Hot Water 32 Technical & Specification Information – Bosch 32 Series Water Heaters | 31 System Layouts Bosch 32 Water Heater Cascade & Storage Application Layouts Note: Suitable layout for Bosch 32 & 32C ONLY Legend Isolation valve Pressure relief valve Legend Non-return valve Isolation valve Tundish Pressure relief valve Pressure limiting valve Non-return Pumpvalve Tundish Pressure limiting valve Pump Filter (in-line) Connectors
| Technical & Specification Information – Bosch 32 Series Water Heaters Bosch Commercial 32 Series Accessories Controllers Main Remote Controller Part No: RCM3211 3 Time display 3 Temperature settings 3 “Burner On” display when in use 3 “Circulation mode on” display for 32Q only 3 Full diagnostic display 3 Maximum of 3 controllers can be fitted to the 32, 32Q or 32C. i.e.
Technical & Specification Information – Bosch 32 Series Water Heaters | 33 Controllers Vent Cap for Bosch 32 & 32Q Part No: KMVC-100 3 Used for outdoor installations of the Bosch 32 or 32Q only Vent Cap for Bosch 32C Part No: BCVC-100C 3 Used for outdoor installations of the 32C only Commercial Kit Accessories Floor Mount Kit Part No: BFMK32 3 Free standing system for Bosch Cascade Pack 3 Comes standard with Cascade Therm kits Connection Kit Part No: BCK32 3 Connects two cascade modules side by side
| Technical & Specification Information – Bosch 32 Series Water Heaters Bosch Commercial 32 Series Accessories Secondary Pumps Dual Star-Z 20/7 Deluxe Pump System Part No: 8736200002 3 Max head: 7m 3 Connections: ¾” (20mm) 3 Mains AC Voltage: 1 ~ 230V, 50Hz Dual Top-Z 30/10 EM Deluxe Pump System Part No: 8736200003 3 Max head: 10m 3 Connections: 1 ¼” (32mm) 3 Mains AC Voltage: 1 ~ 230V, 50Hz Dual Star-Z 20/7 EM Basic Pump Systems Part No: 8736200004 3 Max head: 7m 3 Connections: ¾” (20mm) 3 Mains AC
Technical & Specification Information – Bosch 32 Series Water Heaters | 35 Pump Kit 3 Comes standard in tank packs including two or three cascaded appliances, and a 315L stainless steel tank (refer page 52). 3 Includes Lowara 2HMS3 horizontal multistage pump, thermally wrapped connections and a ball valve. Pump Kit Technical Information Lowara 2HMS3 Suitable for drinking water the 2HMS3 is a booster pump within the Bosch tank pack systems. Technical Information: Lowara 2HMS3 3 Flow rate: 2 m3/h (33.
1965 36 | Technical & Specification Information – Bosch 32 Series Water Heaters 1725 Warm Water Return Tanks 590 Cold Water Inlet Hot Water Outlet PTR Valve 350 455 315L Stainless Steel Tank - 315C220T 250 3 315L Stainless Steel Commercial Storage Tank 3 20mm flow and return 3 Left hand connections 32mm 1965 3 Sensor well pocket for thermostat 3 Heat loss exceeds MEPS standards Warm Water Return 1725 3 Marine grade stainless steel 590 Cold Water Inlet Hot Water Outlet 250 O 350 76 455
1965 Technical & Specification Information – Bosch 32 Series Water Heaters | 37 1725 590 Warm Water Return Hot Water Outlet Cold Water Inlet PTR Valve 350 455 315L Stainless Steel Tank - 315C250T 250 3 315L Stainless Steel Commercial Storage Tank 3 50mm connections with a return line port 3 Sensor well pocket for thermostat 1965 3 Marine grade stainless steel 1725 3 Heat loss exceeds MEPS standards Warm Water Return 350 250 O 76 455 O 39 Cold Water Inlet 34O 450L Vitreous Enamel Tank
| Technical & Specification Information – Bosch 32 Series Water Heaters CascadeFlow Cascade systems System Application Bosch cascaded continuous flow systems are designed for applications where high flow rates are required consistently throughout the day. Cascading the systems allows higher flow rates than a single appliance can supply. Intelligent system controls enable staging and rotating which extends the lifetime of the appliances.
Technical & Specification Information – Bosch 32 Series Water Heaters | 39 CascadeFlow Systems Wall Mounted Bosch CascadeFlow – CF232W & CF232WC Part Numbers: CF232WNG, CF232WLP, CF232WCNG, CF232WC5NG, CF232WCLP, CF232WC5LP Specification Value Application Indoor/Outdoor Thermal Output 115kW(32C) 111kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 434(32C) 500(32) Litres per minute (25°C Rise) 64 Litres per minute (50°C Rise) 32 Hot, Cold and Gas Conn.
| Technical & Specification Information – Bosch 32 Series Water Heaters CascadeFlow Systems Wall Mounted Bosch CascadeFlow – CF332W & CF332WC Part Numbers: CF332WNG, CF332WLP, CF332WCNG, CF332WC5NG CF332WCLP, CF332WC5LP Specification Value Application Indoor/Outdoor Thermal Output 172.5kW(32C) 165kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 651(32C) 750(32) Litres per minute (25°C Rise) 96 Litres per minute (50°C Rise) 48 Hot, Cold and Gas Conn.
Technical & Specification Information – Bosch 32 Series Water Heaters | 41 Bosch CascadeFlow – CF432W & CF432WC Part Numbers: CF432WNG, CF432WLP, CF432WCNG, CF432WC5NG, CF432WCLP, CF432WC5LP Specification Value Application Indoor/Outdoor Thermal Output 230kW(32C) 220kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 868 32C) 1000(32) Litres per minute (25°C Rise) 128 Litres per minute (50°C Rise) 64 Hot, Cold and Gas Conn.
| Technical & Specification Information – Bosch 32 Series Water Heaters CascadeFlow Systems Wall Mounted Bosch CascadeFlow – CF532W & CF532WC Part Numbers: CF532WNG, CF532WLP, CF532WCNG, CF532WC5NG, CF532WCLP, CF532WC5LP Specification Value Application Indoor/Outdoor Thermal Output 287.5kW(32C) 275kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 1085(32C) 1250(32) Litres per minute (25°C Rise) 160 Litres per minute (50°C Rise) 80 Hot, Cold and Gas Conn.
Technical & Specification Information – Bosch 32 Series Water Heaters | 43 Bosch CascadeFlow – CF632W & CF632WC Part Numbers: CF632WNG, CF632WLP, CF632WCNG, CF632WC5NG, CF632WCLP, CF632WC5LP Specification Value Application Indoor/Outdoor Thermal Output 287.5kW(32C) 275kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 1302(32C) 1500(32) Litres per minute (25°C Rise) 192 Litres per minute (50°C Rise) 96 Hot, Cold and Gas Conn.
| Technical & Specification Information – Bosch 32 Series Water Heaters CascadeFlow Systems Floor Standing Bosch CascadeFlow – CF232F & CF232FC Part Numbers: CF232FNG, CF232FLP, CF232FCNG, CF232FC5NG, CF232FCLP, CF232FC5LP Specification Value Application Indoor/Outdoor Thermal Output 115kW(32C) 111kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 434(32C) 500(32) Litres per minute (25°C Rise) 64 Litres per minute (50°C Rise) 32 Hot, Cold and Gas Conn.
Technical & Specification Information – Bosch 32 Series Water Heaters | 45 Bosch CascadeFlow – CF332F & CF332FC Part Numbers: CF332FNG, CF332FLP, CF332FCNG, CF332FC5NG, CF332FCLP, CF332FC5LP Specification Value Application Indoor/Outdoor Thermal Output 172.5kW(32C) 165kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 651(32C) 750(32) Litres per minute (25°C Rise) 96 Litres per minute (50°C Rise) 48 Hot, Cold and Gas Conn.
| Technical & Specification Information – Bosch 32 Series Water Heaters CascadeFlow Systems Floor Standing Bosch CascadeFlow – CF432F & CF432FC Part Numbers: CF432FNG, CF432FLP, CF432FCNG, CF432FC5NG, CF432FCLP, CF432CF5LP Specification Value Application Indoor/Outdoor Thermal Output 230kW(32C) 220kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 868 (32C) 1000(32) Litres per minute (25°C Rise) 128 Litres per minute (50°C Rise) 64 Hot, Cold and Gas Conn.
Technical & Specification Information – Bosch 32 Series Water Heaters | 47 Bosch CascadeFlow – CF532F & CF532FC Part Numbers: CF532FNG, CF532FLP, CF532FCNG, CF532FC5NG, CF532FCLP, CF532FC5LP Specification Value Application Indoor/Outdoor Thermal Output 287.5kW(32C) 275kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 651(32C) 750(32) Litres per minute (25°C Rise) 96 Litres per minute (50°C Rise) 48 Hot, Cold and Gas Conn.
| Technical & Specification Information – Bosch 32 Series Water Heaters CascadeFlow Systems Floor Standing Bosch CascadeFlow – CF632F & CF632FC Part Numbers: CF632FNG, CF632FLP, CF632FCNG, CF632FC5NG, CF632FCLP, CF632FC5LP Specification Value Application Indoor/Outdoor Thermal Output 345kW(32C) 330kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 1302(32C) 1500(32) Litres per minute (25°C Rise) 192 Litres per minute (50°C Rise) 96 Hot, Cold and Gas Conn.
Technical & Specification Information – Bosch 32 Series Water Heaters | 49 Sizing Guide CascadeFlow Systems Part Number No of water heaters Gas rate (Mj/H) L/min (20°C rise) L/min (25°C rise) L/min (50°C rise) CF232WNG CF232WLP CF232FNG CF232FLP 2 x 250 500 74 64 32 CF232WCNG CF232WCLP CF232WC5NG CF232WC5LP CF232FCNG CF232FCLP CF232FC5NG CF232FC5LP 2 x 217 434 74 64 32 CF332WNG CF332WLP CF332FNG CF332FLP 3 x 250 750 111 96 48 CF332WCNG CF332WCLP CF332WC5NG CF332WC5LP CF332FCNG CF332
| Technical & Specification Information – Bosch 32 Series Water Heaters CascadeTherm Single appliance pack System Applications Ideal for a small Installation requirements commercial applications where 3 Connect the hot and cold water lines, and the gas line consistent hot water volumes are required at certain 3 Connection to electricity supply via GPOs times of day, or where peaks in hot water demand are 3 Connection and programming of the controller frequent.
Technical & Specification Information – Bosch 32 Series Water Heaters | 51 Bosch CascadeTherm – C315T32WH Part Numbers: C315T32WHNG, C315T32WHLP 850 695 250 455 1725 1965 590 Specification Value Application Indoor/Outdoor Thermal Output 55kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Gas Input Mj/Hr 250(32) Tank material 316L Stainless Steel Tank Size 315L First Hour Delivery (50°C Rise) 1275 Recovery Hour Delivery (50°C Rise) 960 Hot & Cold Conn.
| Technical & Specification Information – Bosch 32 Series Water Heaters CascadeTherm Cascade & Tank Systems System Applications Used in medium to large commercial applications where hot water requirements peak at certain times of the day. Commonly used in large apartment buildings, hotels, and hospitals.
Technical & Specification Information – Bosch 32 Series Water Heaters | 53 Bosch CascadeTherm – CT232-1315SS & CT232C-1315SS. Part Numbers: CT232-1315SSNG, CT232-1315SSLP, CT232C-1315SSNG, CT232C-1315SSLP Specification Value Specification Value Application Indoor/Outdoor First Hour Delivery (50°C Rise) 2235 Thermal Output 115kW(32C) 110kW(32) Recovery Hour Delivery (50°C Rise) 1920 Min Gas Supply Pressure (kPa) 1.13(NG) 2.75(LPG) Hot & Cold Conn.
| Technical & Specification Information – Bosch 32 Series Water Heaters CascadeTherm Single appliance pack Bosch CascadeTherm – CT332-1315SS & CT332C-1315SS Part Numbers: CT332-1315SSNG, CT332-1315SSLP, CT332C-1315SSNG, CT332C-1315SSLP Specification Value Application Indoor/Outdoor Thermal Output 172.5kW(32C) 165kW(32) Min Gas Supply Pressure (kPa) 1.13(NG) 2.
Technical & Specification Information – Bosch 32 Series Water Heaters | 55 Sizing Guide CascadeTherm Tank Systems Part Number C315T32WH CT232-1315SS CT232C-1315SS CT332-1315SS CT332C-1315SS 1 x 250 (Mj/H) 2 x 250 (Mj/H) 2 x 217 (Mj/H) 3 x 250 (Mj/H) 3 x 217 (Mj/H) First Hour Litres (50°C rise) 1275 2235 2235 3195 3195 Recovery Litres (50°C rise) 960 1920 1920 2880 2880 1 x 315 1 x 315 1 x 315 1 x 315 1 x 315 Gas rate (Mj/H) 250 500 434 750 651 Apartments mix of 1 & 2 bedro
| Technical & Specification Information – Bosch 32 Series Water Heaters Bosch 32 Series and Accessories Bosch 32C Part No: BC3200RANG Part No: BC3200RALP Part No: BC3200RA5NG Part No: BC3200RA5LP Bosch 32 Part No: KM3211WHNG Part No: KM3211WHLP Bosch 32Q Part No: KM3211WHQNG Part No: KM3211WHQLP Main Remote Controller Part No: RCM3211 Sub Controller Part No: RCS3211 Quick Connect Cable Part No: 0700073 Systems Controller Part No: KMSC201 Senztek Digital Controller Part No: ALPHASTATPLUSWR Floor
Technical & Specification Information – Bosch 32 Series Water Heaters | 57 Commercial Pump Kit Part No: BCPK32 Dual Star-Z 20/7 Deluxe Pump Part No: 8736200002 Dual Top-Z 30/10 EM Deluxe Part No: 8736200003 Dual Star-Z 20/7 EM Basic Part No: 8736200004 Storage Tank Stainless Steel 315L Part No: 315C220T Storage Tank Stainless Steel 315L Part No: 315C232LR Storage Tank Stainless Steel 315L Part No: 315C250T Storage Tank Vitreous Enamel 400L Part No: 450VE32T
| Technical & Specification Information – Bosch 32 Series Water Heaters 32C PP Extension Pipe 100x600mm Part No: MG85176 32C PP Extension Pipe 100x1000mm Part No: MG85177 32C PP Flue Elbow 90° Part No: MG85181 32C PP Flue Elbow 45° Part No: MG85182 32C Flue Wall Bracket Part No: MG84631 32C PP Horizontal Wall Terminal Part No: MG87930 32C PP Vertical Roof Terminal Part No: MG84862 32C Flue Sealing Ring Part No: MG27356 Vent Cap for Bosch 32 & 32Q Part No: KMVC-100 Vent Cap for Bosch 32C Part No
Technical & Specification Information – Bosch 32 Series Water Heaters | 59 Tech & Spec Warranties Parts Labour Heat Exchanger Tanks Commercial Appliances 2 Years 2 Years 5 Years – Tanks 1 Year 1 Year – 5 Years Flue systems 1 Year 1 Year – – Pumps 1 Year 1 Year – – Controllers 1 Year 1 Year – – Cascade components and Pipework 1 Year 1 Year – – Warrany Statement A full copy of the Bosch Warranty Statement is available on our websites: Australia www.bosch-climate.com.
Robert Bosch (Australia) Pty. Ltd. Australia 1555 Centre Road Clayton Victoria 3168 P (03) 9541 5555 F (03) 9541 5595 Sales Hotline: 1300 30 70 37 Sales Fax: 1300 30 70 38 www.bosch-climate.com.au New Zealand Sales Hotline: 0800 54 33 52 Sales Fax: 0800 54 33 55 www.bosch-climate.co.