Operation Manual

8 Image pane Displays a camera, a map, an image, a document
(HTML file).
9
Alarm List window
Displays all alarms that the system generates.
Allows you to accept or clear an alarm or to start a
workflow, for example, by sending an E-mail to a
maintenance person.
The Alarm List is not being displayed, when the
connection to the Management Server is lost.
10
Monitors window
(only available if at least one
analog monitor group has been
configured)
Displays the configured analog monitor groups.
Allows you to switch to the next or previous analog
monitor group if available.
Note:
The Monitors tab is not visible if your Operator Client
is connected to more than one Management Server.
PTZ Control window
Allows you to control a PTZ camera.
11
Logical Tree window
Displays the devices your user group has access to.
Allows you to select a device for assigning it to an
Image pane.
Favorites Tree
window
Allows you to organize the devices of the Logical Tree
as required.
Bookmarks window
Allows to manage bookmarks.
Map window
Displays a site map. Allows you to drag the map to
display a particular section of the map.
If activated, a map is displayed automatically for each
camera displayed in an Image pane. In this case, the
camera must be configured on a map.
This manual guides you through the basic steps of the configuration and operation with
Bosch VMS.
For detailed help and step-by-step instructions read the Configuration Manual and the
Operator’s Manual or use the Online Help. You find the manuals as PDF files on your
Setup CD.
Bosch VMS Archive Player displays exported recordings.
10
en | Introduction Bosch Video Management System
2013.07 | V1 | Operator Client Operator's Manual Bosch Sicherheitssysteme GmbH