Operation Manual

Displaying camera images
This chapter provides information on how to display camera images.
Some of the features described in this chapter can be deactivated for your user group.
Selecting a time zone
Main window
Notice!
Ensure that the time on all computers of your system is set correctly according to each time
zone where the computers are located.
Management Server and all connected devices including encoders, decoders, VRM Server
computers, DiBos and DVR devices must be in the same time zone. Operator Client computers
(including Client SDK and Cameo SDK) and Configuration Client computers can be in other
time zones than the Management Server.
If your Operator Client is located in another time zone than one or more connected
Management Server computers, you can select for display in the user interface:
– Your local time
– UTC
– Time zone of the Management Server computer you are connected to
The Image panes displaying a camera (live and playback) always show the time of the
corresponding Management Server.
In the Logical Tree,
is displayed on the device icon for all servers that do not share the time
zone that is currently selected in the Operator Client:
You can select the time zone of a server for displaying this time zone in Operator Client.
To select the time zone:
1. In the Logical Tree, right-click a server icon to select the time zone of this server.
2. In the time zone selector list, select the desired entry.
– Local Time: Operator Client
– UTC
6
6.1
Bosch Video Management System Displaying camera images | en 25
Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client