Operation Manual

Arranging Image panes
Main window
To arrange Image panes:
1. Move the slider for the Image pane pattern.
2. Drag an item from the Logical Tree window to an Image pane. Repeat this until all
required cameras are displayed.
If an object is already displayed in a target Image pane, this object is replaced.
3. Drag a camera from one Image pane to another, if required.
To resize an Image pane:
1. Point to an Image pane corner. The pointer appears as a double-headed arrow.
2. Drag the corner to resize the Image pane.
Displaying the Alarm Image window
Main window
You can switch from the Image window to the Alarm Image window if at least one alarm is in
the Alarm List.
Notice!
A map displayed in an Alarm Image pane is optimized for display and contains only the initial
view of the basic .dwf file.
To display the Alarm Image window:
4 In an Image window, click .
The Alarm Image window is displayed.
To display the Image window again:
4 In an Image window, click
.
Live Mode or Playback Mode is displayed depending on the Mode that was displayed
before.
Starting manual recording
Main window
You can start recording for each camera manually. The quality level of alarm recording mode is
used. The duration of alarm recording is configured in the Configuration Client.
If the selected camera is already recording, the quality level is changed to alarm recording
mode. The alarm recording can be protected when NVR recording is used. With VRM
recording, the alarm recording is not protected.
Note: You cannot start manual recording for a DiBos camera.
To start recording:
1. Select an Image pane displaying a camera.
2. Click
.
Recording is started.
6.5
6.6
6.7
Bosch Video Management System Displaying camera images | en 27
Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client