Operation Manual

Using digital zoom
Main window
Every Image pane provides a digital zoom function. This digital zoom has 11 levels: 1x, 1.35x,
1.8x, 2.5x, 3.3x, 4.5x, 6x, 8.2x, 11x, 14.9x, 20.1x.
When you save a Favorites View, the current setting of the digital zoom and the image section
are saved.
When you click
, the current setting of the digital zoom and the image section are used
for instant playback.
When Operator Client restarts, the current setting of the digital zoom and the image section
are retained.
To use digital zoom:
1. Right-click anywhere on an Image pane and click Zoom in.
indicates that the digital zoom was used.
2. Repeat the previous step to zoom in.
3. Drag the image to navigate to the desired image section.
4. Right-click the Image pane and click Zoom 1:1 to return to the original size.
disappears.
Note:
You can also use the controls for digital zoom in the PTZ Control window.
Saving a single image
Main window
To save a single image:
1. Select an Image pane.
2. Click
.
A dialog box for saving the image file is displayed.
3. Select the desired directory, enter a file name, and select the desired file type. JPG and
BMP are available.
4. Click OK.
The image is saved. The file contains additional information about the camera.
If you logged on to an Enterprise Management Server, the camera name is displayed with
the name of this camera’s Management Server as a prefix.
Printing a single image
Main window
To print a single image:
1. Select an Image pane.
2. Click
.
A dialog box for selecting the printer is displayed.
3. Click OK.
The image is printed. The printout contains additional information about the camera.
If you logged on to an Enterprise Management Server, the camera name is displayed with
the name of this camera’s Management Server as a prefix.
6.12
6.13
6.14
30 en | Displaying camera images Bosch Video Management System
2013.07 | V1 | Operator Client Operator's Manual Bosch Sicherheitssysteme GmbH